Mercedes-Benz S55 AMG Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz S55 AMG Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2001 Mercedes-Benz S55 AMGV8-5.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2006 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2002 Mercedes-Benz S55 AMGV8-5.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
2003 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2005 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
Show example Mercedes-Benz S55 AMG Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Ira

36 years of experience
259 reviews
Ira
36 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Pre-purchase Car Inspection - Sun City Center, Florida
Very happy. Ira is a real PRO! I would call on him again.

Jay

23 years of experience
184 reviews
Jay
23 years of experience
Mercedes-Benz S55 AMG V8-5.5L - Camshaft Position Sensor - Glen Ellyn, Illinois
Very friendly and knowledgable. I would definately use again.

James

30 years of experience
925 reviews
James
30 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Air is not coming out of vents Inspection - Orlando, Florida
James is a go getter he wont stop until its right...love his tenacity!

Richard

19 years of experience
82 reviews
Richard
19 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Battery will not hold a charge - Cameron, North Carolina
On time and very knowledgeable, gave great recommendation.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz S55 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Are My Tires Wearing Out Faster Than Normal?
If If you noticed that one or more of your tires are exhibiting signs of abnormal wear or is wearing out at a suspiciously fast rate, it may be a sign that there are other problems with your vehicle. Your...
P2148 OBD-II Trouble Code: Fuel Injector Group A Supply Voltage Circuit High
What What the P2148 code means? P2148 is an OBD-II generic code for the engine control module (ECM) detecting the fuel injector group A supply voltage circuit has a high resistance causing a short in the system. What causes the...
How to Replace an Air Conditioner Receiver Drier
The AC receiver/drier is stores and dries refrigerant. This component should be replaced if too much water enters the system or if leaks are found.

Clutch broke and won't shift into gear.

This could be a symptom of a bad clutch. Another way to test the clutch is to drive down the road, get into 3rd gear and with your foot on the gas pedal push the clutch in and let the...

My charcoal vapor canister is clogged. I have a 1997 toyota corolla. Is there a way to clean the canister or do i need to shell o

If you input your year, make and model at Car-Part.com (http://www.car-part.com) and search on "vapor canister", you will find plenty of them used for $25 on up. A used canister will be fine and generally you get at least a...

Good day so i replaced a [timing belt](/topics-timing-belt/) on a 2002 hyundai santa fe and was given some bad advice on top dead center and i need some clarification on how to resolve So i have set the engine now at top deac center on the compression stroke the problem before it was set on the exhaust stroke. Now that i did that the crank pulley lines up fine, piston is at top dead center on compression stroke howevr both cams timing marks are off 180 degrees. note this is on a 2.7 v6 Now what i am wondering is can i just take the belt off rotate the top two cams to the right (front of the car) till they align with timing marks and put it all back together and everything be ok.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com