Mercedes-Benz ML250 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz ML250 Control Arm Assembly Replacement is $341 with $159 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$2008.88Shop/Dealer Price$2468.92 - $3830.59
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$507.19Shop/Dealer Price$590.71 - $831.89
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$2037.91Shop/Dealer Price$2504.17 - $3893.43
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$507.19Shop/Dealer Price$590.76 - $831.98
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1377.09Shop/Dealer Price$1635.49 - $2373.98
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$897.14Shop/Dealer Price$1048.82 - $1486.56
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1377.09Shop/Dealer Price$1628.35 - $2361.48
2015 Mercedes-Benz ML250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$911.74Shop/Dealer Price$1063.20 - $1500.78
Show example Mercedes-Benz ML250 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0

Mohammed

10 years of experience
152 reviews
Mohammed
10 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Brake Pads Replacement (Rear) - Cary, North Carolina
All good. Knowledgeable and friendly. Highly recommend!

Edwin

18 years of experience
8 reviews
Edwin
18 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Oil Change - Cary, North Carolina
Edwin was awesome, not only was he knowledgeable about my car he is just an all around great guy and fun to chat with. I will definitely book Edwin again

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz ML250 L4-2.1L Turbo Diesel - Brake Pads Replacement (Front, Rear) - Trabuco Canyon, California
Great job, showed up on time, completed the work on time for far less than the dealership charges. What else is there to say.

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Mercedes-Benz 300CE L6-3.0L - Control Arm Assembly Replacement (Rear Lower Left, Rear Lower Right) - Austin, Texas
Punctual, professional, proficient, and positive.paradigm prognosticator.

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0
Number of Mercedes-Benz Control Arm Assembly Replacement services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Does Drivability Actually Mean?
Drivability means a car's ability to drive. Technicians and service experts alike determine a car’s drivability by adhering to a condition checklist.
What Does the Diesel Particulate Filter Warning Light Mean?
The diesel particulate filter light turns on when the soot level from the diesel exhaust is high and your car is at risk of going into limp mode.
How to Buy Good Quality Snow Chains
If If you live in an area where snowfall is a possibility, then you need to be prepared for winter driving conditions. That means having a set of tire chains in your trunk in case the snow becomes deep enough...

How does the Speed Sensitive steering work?

All Fusion models have Speed Sensitive steering, regardless of whether you have an Electronic Power Steering system or a Hydraulic system. This feature is designed to make it simpler to turn the wheel when you’re driving at low speeds. Here’s...

Front turn signals are not working

The only reason I can think of for this to happen is if aftermarket bulbs were used and they were not the right ones. The car should only blink fast like that when the bulb has failed to let the...

I have a 2011 Buick LaCrosse automatic. When i put the car in reverse it gives me resistance when i hit the gas. If i don’t push t

This problem may be caused by a sticking defective pressure control solenoid in the transmission and you will need to have the transmission pressure tested to verify the solenoid needs replaced. You may also need to replace the transmission control...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com