Honda S2000 Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Honda S2000 Fuel Injector Replacement is $741 with $601 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2002 Honda S2000L4-2.0L	Service typeFuel Injector Replacement	Estimate$1539.16	Shop/Dealer Price$1888.80 - $2929.62
2008 Honda S2000L4-2.2L	Service typeFuel Injector Replacement	Estimate$1348.31	Shop/Dealer Price$1650.72 - $2553.84
2005 Honda S2000L4-2.2L	Service typeFuel Injector Replacement	Estimate$1530.15	Shop/Dealer Price$1878.05 - $2917.56
2007 Honda S2000L4-2.2L	Service typeFuel Injector Replacement	Estimate$1348.31	Shop/Dealer Price$1650.75 - $2553.88
2003 Honda S2000L4-2.0L	Service typeFuel Injector Replacement	Estimate$1530.15	Shop/Dealer Price$1879.52 - $2920.14
2004 Honda S2000L4-2.2L	Service typeFuel Injector Replacement	Estimate$1530.15	Shop/Dealer Price$1878.19 - $2917.81
2001 Honda S2000L4-2.0L	Service typeFuel Injector Replacement	Estimate$1530.15	Shop/Dealer Price$1878.06 - $2917.59
2000 Honda S2000L4-2.0L	Service typeFuel Injector Replacement	Estimate$1530.15	Shop/Dealer Price$1878.05 - $2917.56

Show example Honda S2000 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(43)

Rating Summary

36

3

1

2

1

36

3

1

2

1

SEE REVIEWS NEAR ME

Chet

42 years of experience

509 reviews

Chet

42 years of experience

by rufino

Honda S2000 L4-2.2L - Check Engine Light is on - Chula Vista, California

very honest mechanics. of all aspect . Knowledgeable.

Jeffrey

17 years of experience

111 reviews

Request Jeffrey

Jeffrey

17 years of experience

Request Jeffrey

by Brian

Honda S2000 L4-2.2L - Car is not starting - Clearwater, Florida

Jeffrey was able to quickly replace a part that put my car back into running condition.

Richard

36 years of experience

9 reviews

Request Richard

Richard

36 years of experience

Request Richard

by Cameron

Honda S2000 L4-2.0L - Pre-purchase Car Inspection - Jacksonville, Florida

He did an excellent job inspecting a vehicle I was about to purchase. Gave a very detailed report and explained everything clearly. I would feel very comfortable with him as my regular mechanic.

Gustavo

21 years of experience

75 reviews

Request Gustavo

Gustavo

21 years of experience

Request Gustavo

by Alex

Honda S2000 L4-2.2L - Car is not starting - San Antonio, Texas

very competent

Excellent Rating

(43)

Rating Summary

36

3

1

2

1

36

3

1

2

1

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Speedometer Sensor

Common signs include the speedometer not working, cruise control not engaging, Check Engine Light coming on, and loss of power.

P0012 OBD-II Trouble Code: Camshaft Position A - Timing Over-Retarded (Bank 1)

P0012 code definition Camshaft Position “A” - Timing Over-Retarded (Bank 1) What the P0012 code means P0012 is the OBD-II generic code...

Insurance Requirements for Car Registration in Virginia

The The state of Virginia requires that all drivers prove that they are financially responsible for costs associated with a car accident. Most drivers choose to purchase a car insurance policy to meet this requirement. However, drivers can also pay...

How much will it cost to tighten the tension pulley and repair power steering leak?

Hello there, you have several different issues going on with your 1999 Pontiac Bonneville. If the tensioner pulley is loose, it most likely needs replaced as it has become damaged on the inside and tightening it will not fix this....

All wheel drive is off and abs lights are on

This may be an issue of a faulty ABS control module or possibly faulty wheel sensors. This is a unit that controls the activation of the ABS system based upon inputs from the ABS wheel sensors. When this module is...

Why is there transmission fluid splashed all over the top of the transmission

Hello, thank you for writing in. Automatic transmissions are complex components. There are several places where they can leak from the housing, it can leak from the input and output shafts, or fluid lines. With that being said, you should...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com