Volvo V90 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,461)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,461)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Volvo V90 Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Volvo V90L4-2.0L TurboService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Volvo V90L6-2.9LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Volvo V90L6-2.9LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Volvo V90L4-2.0L TurboService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2020 Volvo V90L4-2.0L TurboService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2018 Volvo V90L4-2.0L TurboService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Volvo V90 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(1,461)

Rating Summary
1,372
47
10
5
27
1,372
47
10
5
27

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Volvo V90 L6-2.9L - Oil Change - Raleigh, North Carolina
Brandon was awesome. Very knowledgeable about problems and offered great solutions. Definitely recommending my mechanic

Amor

43 years of experience
181 reviews
Amor
43 years of experience
Volvo V90 L6-2.9L - Top off coolant - Palo Alto, California
Didn't initially bring coolant even though job was to top up coolant. Had to leave and come back. But otherwise very smooth.

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Volvo XC90 L6-3.2L - Clunking or knocking noise from wheels - Austin, Texas
Great

Jerel

11 years of experience
125 reviews
Jerel
11 years of experience
Volvo S60 L5-2.4L - Starter - Raleigh, North Carolina
I had a great experience with the service. The technician was friendly, PROFESSIONAL,knowledgeable, and PROMPT. The technician seemed to enjoy his work and the company. I was not to sure what to expect when booking the appointment but I am very pleased. I will be reffering friends.

Excellent Rating

(1,461)

Rating Summary
1,372
47
10
5
27
1,372
47
10
5
27
Number of Volvo services completed
16071+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

What Are Xenon Headlights?
You’ll You’ll hear a lot of names bandied about when discussing headlights – halogen, xenon, “super blue,” and HID are just some of them. If you’re thinking about replacing your headlights and are looking for something that’s both higher performing...
How to Install a New Pair of Car Speakers
Installing new car speakers can greatly improve the quality of audio when you listen to the radio or music in your car.
P0534 OBD-II Trouble Code: Air Conditioner Refrigerant Charge Loss
P0534 code means that the AC compressor clutch is cycling to frequently often due to low refrigerant or inoperative cooling fans.

Tail gate won't release

Hey there. The rods connect to the center control handle using plastic clips and these clips or the handle breaks. You will need to have a mechanic remove the inner tailgate cover to gain access to the latch handle and...

My car temp reached 201 and my fan is not turning on. I can smell sometimes a burning almost smell coming from the fuse box area

My Denali will not turn off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com