Toyota Venza Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Toyota Venza Fuel Injector Replacement is $1175 with $965 for parts and $210 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2010 Toyota VenzaV6-3.5L	Service typeFuel Injector Replacement	Estimate$3678.14	Shop/Dealer Price$4506.29 - $6969.66
2012 Toyota VenzaL4-2.7L	Service typeFuel Injector Replacement	Estimate$2674.41	Shop/Dealer Price$3291.01 - $5134.64
2010 Toyota VenzaL4-2.7L	Service typeFuel Injector Replacement	Estimate$2674.41	Shop/Dealer Price$3291.05 - $5134.71
2012 Toyota VenzaV6-3.5L	Service typeFuel Injector Replacement	Estimate$3654.71	Shop/Dealer Price$4478.33 - $6938.31
2009 Toyota VenzaV6-3.5L	Service typeFuel Injector Replacement	Estimate$3654.71	Shop/Dealer Price$4482.16 - $6945.01
2011 Toyota VenzaL4-2.7L	Service typeFuel Injector Replacement	Estimate$2674.41	Shop/Dealer Price$3291.26 - $5135.07
2016 Toyota VenzaL4-2.7L	Service typeFuel Injector Replacement	Estimate$2149.21	Shop/Dealer Price$2634.57 - $4084.34
2009 Toyota VenzaL4-2.7L	Service typeFuel Injector Replacement	Estimate$2674.41	Shop/Dealer Price$3291.05 - $5134.70

Show example Toyota Venza Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(92)

Rating Summary

87

2

1

0

2

87

2

1

0

2

SEE REVIEWS NEAR ME

Hugh

12 years of experience

159 reviews

Hugh

12 years of experience

by Kiera

Toyota Venza V6-3.5L - Oil Change - Castle Rock, Colorado

Punctual, courteous, and quick. Would have him do repairs again!

Nathan

30 years of experience

260 reviews

Nathan

30 years of experience

by Katha

Toyota Venza L4-2.7L - Oil Change - Tulsa, Oklahoma

Nathan is very friendly and professional. He came to change the oil on my car and finished up even though it was raining like crazy.

Daniel

22 years of experience

346 reviews

Daniel

22 years of experience

by Danny

Toyota Venza L4-2.7L - Oil Change - Houston, Texas

Showed up an hour late. Other than that did good job so I give 3 hours.

Paul

24 years of experience

361 reviews

Paul

24 years of experience

by Nick

Toyota Venza L4-2.7L - Car does not shift from park to drive - Charlotte, North Carolina

Paul is extremely professional, knowledgeable and friendly. He made absolutely sure that he had made the correct diagnosis, explained how had come to it and then made sure that I understood. He was really patient and thorough. He made the experience a pleasant one. Top notch customer service. Top notch guy.

Excellent Rating

(92)

Rating Summary

87

2

1

0

2

87

2

1

0

2

SEE REVIEWS NEAR ME

Recent articles & questions

How to Clean an Idle Air Control Valve

Maintenance of an idle air control valve includes cleaning it from time to time to ensure it lasts long. It keeps your car idle level at normal.

How to Reduce the Damage to a Flooded Car

Flood damage can greatly impact the function and value of your car. However, there are methods to preserve your car and minimize the amount of damage.

How Long Does a Mirror Control Switch Last?

Modern Modern vehicles come with a variety of different perks that can make the driving experience much better. Most drivers get quite used to these features and never give what it takes to make them work. Among the most used...

missing catalytic converter.

A catalytic converter is a major component to your car's exhaust system. If this is truly missing, this would mean that someone would have had to have physically removed it which involves a fair amount of work as well as...

The car won't start without starter fluid, V2500 Suburban Chevrolet

Hello and thank you for your question. Perform a fuel pressure test. Even though the fuel is pulsing out of the injectors with the engine cranking the fuel pressure could be too low. The system must have a minimum of...

Im getting P061F code should I Flash it or just replace the PCM . In my 08 explorer

Hi There, As you know, this code relates to a PCM malfunction, which is usually due to things like the PCM becoming faulty itself, a short in the wiring to the PCM or in some cases a software problem with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com