Porsche Macan Battery will not hold a charge Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Battery will not hold a charge Inspection Service

How much does a Battery will not hold a charge Inspection cost?

On average, the cost for a Porsche Macan Battery will not hold a charge Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Porsche MacanV6-2.9L TurboService typeBattery will not hold a charge InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Porsche MacanV6-3.6L TurboService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2017 Porsche MacanV6-3.6L TurboService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Porsche MacanV6-3.0L TurboService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2021 Porsche MacanV6-3.0L TurboService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Porsche MacanV6-3.0L TurboService typeBattery will not hold a charge InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Porsche MacanL4-2.0L TurboService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2016 Porsche MacanV6-3.0L TurboService typeBattery will not hold a charge InspectionEstimate$99.99Shop/Dealer Price$125.63 - $144.85
Show example Porsche Macan Battery will not hold a charge Inspection prices

Your car has a battery for a very good reason – it provides the initial power needed to crank the engine and get the car running. After that, the alternator takes over, providing the power for your accessories, as well as recharging the battery. If your battery has died and then recharged, and you’ve found that it will not hold a charge (the battery is fine for a little while, but then the charge dissipates), there’s a problem somewhere in your system that must be diagnosed and repaired.

How this system works:

In a normal system, it works like this: Your battery supplies power to the starter and the main relay. The main relay powers the fuel pump and computer. The battery also supplies the initial electric spark to the spark plugs. Once the engine is cranked, the alternator begins turning, which generates the electricity necessary to recharge the battery and to power the engine and other components.

The alternator should always provide enough electricity to recharge the battery and power your other components. If it does not, then the electricity needed comes from the battery and because it’s not being recharged, it will eventually die. Of course, automotive batteries have a limited lifespan – they should be checked regularly after they’re about three years of age (although it’s wise to have them checked at least twice a year no matter how new they might be).

If your battery won’t hold a charge, it means there are problems within the system that are either preventing the battery from being recharged, or draining the battery when the engine is off.

Common reasons for this to happen:

  • Bad Cell: Batteries will eventually die no matter what. They will develop a bad cell that prevents them from holding a charge and will need to be replaced. This is part of normal vehicle maintenance. Have your battery tested every Spring and Fall to ensure that you’re able to avoid being stranded by a failed battery. Batteries most commonly “die” during hot and cold weather.

  • Low Water: Some batteries have fill holes that allow you to maintain them, although most modern batteries are maintenance free and don’t allow you to add water. If you have a maintainable battery, topping off the water level may solve the problem.

  • Bad Alternator: If the alternator is not charging the battery while the engine operates, the battery will not hold a charge. This is most noticeable if you jump the battery and the engine runs for a while, only to eventually die. It is also observable by watching your headlights – while the engine is running, check the lights. If they start bright but slowly fade, chances are good that the problem is the alternator, not the battery.

  • Corroded Battery Cables: Battery cables and terminals can suffer from corrosion. As it builds up, this corrosion prevents solid contact, and can limit the charge being supplied to the battery from the alternator. Regular maintenance of your battery can prevent this.

  • Loose Alternator Belt: If the alternator belt is loose (old and stretched), it will not operate the alternator properly, which means that the charge the alternator produces may not be enough to recharge the battery.

  • Parasitic Drain: It might be that your battery and alternator are just fine, but there’s something else draining the charge. This could be something as simple as leaving the lights on, or having an accessory plugged in to an “always on” power outlet, or it could be a stuck relay or something else that’s pulling power from the battery when the engine isn’t running.

What to expect:

A top-rated mobile mechanic will come to your office, home or other location to inspect the battery, the alternator and other components of the charging system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will test your battery, alternator and starter. The mechanic will also check for parasitic drain and other problems that might make your battery not hold a charge. It may be necessary to replace your battery in order to diagnose other system-wide problems (if the battery has developed a bad cell).

How important is this service?

If your battery won’t hold a charge, it’s not safe to drive your car. Even if your alternator is working fine, turning the car off for something as simple as stopping at the gas station will mean that the engine won’t crank and you’ll need to jump it off. One of our top-rated mechanics can diagnose the problem and get you back up and running.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(24)

Rating Summary
22
1
0
0
1
22
1
0
0
1

Kenneth

20 years of experience
781 reviews
Kenneth
20 years of experience
Porsche Macan L4-2.0L Turbo - Brake Pads Replacement (Rear) - Beverly Hills, California
The best ever

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Porsche Macan V6-3.0L Turbo - Oil Change - Cliffside Park, New Jersey
Very meticulous and detailed workmanship. Communication was on point about delay. Also made sure I got the right oil for the car.

Manuel

32 years of experience
579 reviews
Manuel
32 years of experience
Porsche Macan L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Irvine, California
Manny was on time and very professional. Explained the service and work warranty and he finished early. Will use this service again for.

Willie

24 years of experience
116 reviews
Willie
24 years of experience
Porsche Macan V6-3.0L Turbo - Oil Change - Gardena, California
He is patient and professional.

Excellent Rating

(24)

Rating Summary
22
1
0
0
1
22
1
0
0
1
Number of Porsche Macan services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Cadillac Escalade EXT
The 2012 Cadillac Escalade EXT has a 403-hp, 6.2-liter V8 engine, a fully configurable cargo bed, and a fuel-saving cylinder-deactivation system.
P0181 OBD-II Trouble Code: Fuel Temperature Sensor 'A' Circuit Range/Performance
P0181 P0181 code definition Fuel Temperature Sensor ‘A’ Circuit Range/Performance What the P0181 code means P0181 is a generic OBD-II code that is triggered when the fuel temperature sensor ‘A’ circuit goes out of specifications during self-testing. This indicates that...
P0663 OBD-II Trouble Code: Intake Manifold Tuning Valve Control Circuit/Open Bank 2
P0663 means that a fault has been detected by the PCM in the intake manifold tuning valve control circuit due to a faulty driver in the PCM.

Put key in ignition. Lights and everything come on for a second, then went off as I turned the key. Now no power, key stuck

Hi, thanks for writing in. This sounds like your battery cable connections are corroded or loose at the battery. Try to see if the battery connections are loose by wiggling them and see if power returns. If power returns, then...

What are signs my transfer case is going bad?

Hi there. Typically when a transfer case fails it will start making a grinding noise and can even cause some jerking while driving. It can also cause some instability when driving at higher speeds. From what you are explaining, it...

Hi my car won't let me put gas in it. It keeps clicking every few dollars or so. My check engine light is on .

Hi There, This is likely related to your EVAP emissions system and something called a purge solenoid. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com