Nissan Xterra Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Nissan Xterra Power Steering Pressure Hose Replacement is $282 with $100 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Nissan XterraV6-4.0LService typePower Steering Pressure Hose ReplacementEstimate$448.06Shop/Dealer Price$503.84 - $658.20
2002 Nissan XterraV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$819.42Shop/Dealer Price$968.82 - $1410.40
2012 Nissan XterraV6-4.0LService typePower Steering Pressure Hose ReplacementEstimate$1002.18Shop/Dealer Price$1183.45 - $1718.89
2003 Nissan XterraV6-3.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$819.42Shop/Dealer Price$968.86 - $1410.47
2000 Nissan XterraV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$892.23Shop/Dealer Price$1072.17 - $1602.25
2001 Nissan XterraV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$775.63Shop/Dealer Price$924.68 - $1366.01
2006 Nissan XterraV6-4.0LService typePower Steering Pressure Hose ReplacementEstimate$433.64Shop/Dealer Price$486.66 - $638.95
2000 Nissan XterraL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$892.23Shop/Dealer Price$1070.25 - $1598.89
Show example Nissan Xterra Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Peter

22 years of experience
479 reviews
Peter
22 years of experience
Xterra 2002 - Power Steering Pressure Hose - Los Angeles, CA
Great experience. Will request Peter again!

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Xterra 2006 - Battery will not hold a charge - San Antonio, TX
Mike is experienced and walks you through the process. He is fantastic.

Bill

30 years of experience
52 reviews
Bill
30 years of experience
Xterra 2006 - Crankshaft Position Sensor - Denver, CO
Bill did great work.

Jason

0 years of experience
20 reviews
Jason
0 years of experience
Xterra 2012 - Strut Assembly - Tampa, FL
Jason was excellent completing the job in a timely manner Very appreciative of his recommendations of issues on vehicle that need to be addressed

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Nissan Xterra Power Steering Pressure Hose Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Find and Purchase a Classic Citroen
With many firsts to its name, including the world's first mass-produced front-wheel drive car, the French automobile manufacturer PSA Peugeot Citroen group began manufacturing its Citroen line of vehicles in 1919. Finding classic Citroen cars is much easier when you...
How to Do a Tire Safety Inspection
Car tires are a big part of staying safe on the road. Check tire inflation, tread depth, and sidewalls to make sure they're in good shape.
How to Find the Right Car Seat For Your Child
Picking Picking the right car seat (https://www.yourmechanic.com/article/finding-the-right-car-seat) is a weighty matter. The size and type of chair you buy (http://www.parents.com/baby/gear/car-seats/which-car-seat-is-right-for-child/) will, in large part, be based on the weight of the chair, and the weight of your baby. Debbi Baer,...

Many issues with the car. Can a clogged catalytic converter cause transmission issues?

The catalytic converter has very very little to do with the transmission. The catalytic converter will keep the engine from being able to "exhale" and can cause engine problems and damage if faulty, but it wont cause direct transmission issues....

I have an 07 dodge charger 2.6v6 with 180000miles. My codes are P0420 and P0339.. Wat is wrong and wat do i need to purchase. O2s?

Hi there. Unfortunately, without completing a physical inspection, tell you exactly what parts you need to resolve these codes is simply not practical. I would highly recommend reading these two articles highlighted in blue; P0420 Article (https://www.yourmechanic.com/article/p0420-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-1-by-jamahl-walker) & P0330 Article...

My Dodge Journey randomly shows hot oil message under mileage and a few other lights. Once I turn car off it then won't rest

There is a possibility that trouble codes have been stored and those should be sought first as if they exist they will provide clues to resolve the issues you are seeing. If there are no codes, what you can do...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com