Ford Freestar Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(91)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(91)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a Ford Freestar Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Ford FreestarV6-3.9LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Ford FreestarV6-4.2LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Ford FreestarV6-3.9LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Ford FreestarV6-3.9LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2006 Ford FreestarV6-3.9LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Ford FreestarV6-4.2LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Ford FreestarV6-4.2LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Ford FreestarV6-4.2LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Freestar Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(91)

Rating Summary
83
3
1
2
2
83
3
1
2
2

Danny

11 years of experience
269 reviews
Danny
11 years of experience
Ford Freestar V6-4.2L - Starter - Philadelphia, Pennsylvania
Friendly,timely Courteous

Jason

23 years of experience
190 reviews
Jason
23 years of experience
Ford Freestar V6-3.9L - Camshaft Position Sensor - Old Hickory, Tennessee
As always, Jason did a great job. On time, very professional and qualty work. I will definitely use him again.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Ford Freestar V6-3.9L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Dallas, Georgia
Michael was friendly, professional, courteous, and very knowledgeable.

Nathan

18 years of experience
41 reviews
Nathan
18 years of experience
Ford Freestar V6-3.9L - Cylinder Head Temperature Sensor - Dallas, Georgia
He did a very good job. Great friendly attitude and a Skilled mechanic. He explained the job well. Reviewed the work done and explained the other work that needs to be done; in a understandable manner for some one who would be unskilled with mechanics.

Excellent Rating

(91)

Rating Summary
83
3
1
2
2
83
3
1
2
2
Number of Ford Freestar services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Lexus ES
The The 2012 Lexus ES is a luxury sedan that successfully competes with the Audi A6 and Acura TL. This front-wheel drive sedan has driving comfort while providing a spacious interior whether you are carrying kids or cargo. It offers...
P2272 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
What What the P2272 code means? P2272 is an OBD-II generic code for the engine control module (ECM) detecting the O2 sensor for bank 2 sensor 2 after the catalytic convertor is stuck lean. What causes the P2272 code? The...
P0679 OBD-II Trouble Code: Cylinder 9 Glow Plug Circuit
P0679 means there is an issue with the cylinder 9 glow plug circuit. This may be due to fault in the glow plug's relays, module, wires, or connectors.

Spark plug misfire and car not starting

Generally, misfires are caused by either a spark or fuel issue or in cases, a combination of both. Spark related problems generally will result from things like ignition coils, crankshaft position sensor, spark plugs, spark plug wires or ignition modules...

Popping/clunking sound from right passenger side front. Front suspension was inspected over the weekend

Hi there. In most cases, when you have a problem like this, it's caused by a loose or damaged strut, strut mount, stabilizer bar bushings or CV joints being worn out. The stabilizer bar bushing specifically is usually the part...

Turbo oil leak cost Audi A6 Quattro 2002 twin turbo

Hi Hhh, Thank you for contacting YourMechanic! To set up the quote for the oil gasket leak for your vehicle, we need some extra information in order to get you the most up-to-date prices on parts and labor. Please go...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com