Chevrolet Metro Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Metro Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Chevrolet MetroL4-1.3LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2001 Chevrolet MetroL4-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Chevrolet MetroL4-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Chevrolet MetroL3-1.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2000 Chevrolet MetroL4-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1998 Chevrolet MetroL4-1.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Chevrolet MetroL3-1.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1999 Chevrolet MetroL3-1.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Metro Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Phil

30 years of experience
48 reviews
Phil
30 years of experience
Chevrolet Metro L4-1.3L - Stabilizer Bar Links Replacement (Rear) - Takoma Park, Maryland
Saving money for another repair, will insist on Phil! Just great - I highly recommend him.

Alfred

13 years of experience
501 reviews
Alfred
13 years of experience
Chevrolet Metro L4-1.3L - Car does not shift from park to drive - San Francisco, California
Love this guy - he saved our lives and many thou$and$ of $$

Fabrice

20 years of experience
134 reviews
Fabrice
20 years of experience
Chevrolet Metro L3-1.0L - Car Inspection - Orlando, Florida
Fabrice did an excellent job diagnosing a coolant leak (which I originally thought was a water pump leak meaning a timing belt replacement), and went above and beyond when finding and replacing an O-ring which is no longer available even in aftermarket. Fabrice is ASE certified - that should be added to his mechanic profile.

Nicholas

21 years of experience
354 reviews
Nicholas
21 years of experience
Chevrolet Metro L4-1.3L - Oil Change - Denver, Colorado
Always the best mechanic!! Tells me what is wrong with my car and fixes the problem quickly and efficiently and let's me know any repairs that may be coming up to better plan!!

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Chevrolet Metro services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in New Jersey
New New Jersey parking laws: understanding the basics One of the important things to note about parking alongside the curb in New Jersey is the required distance between the curb and the car. You need to be within six inches...
How to Replace a Headlight Closure Relay
Your headlights depend on the headlight relay located in your vehicle’s fuse box. Occasionally these relays need to be replaced.
P0367 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Low (Bank 1)
Trouble code P0367 means the camshaft position sensor B circuit is too low, often due to oil or other fluids leaking into the sensors or wires.

p0117 code and engine heating to 75% of temp gauge (but no further)

You will have to scan the computer when the engine is cold and look at the data to compare the ECT and the IAT. This is the inlet air temperature sensor and the engine coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). Both sensors...

My car has been sitting in a garage for 2 years

If gasoline was left in the fuel tank for 2 years, the tank would have to be thoroughly drained. The fuel filter should be replaced and it is preferred to remove the fuel injectors from the fuel rail and send...

Car sputtering and rough idle

It appears you may have damaged one of the spark plugs putting it in or one of the parts failed. You will need to have the computer tested for codes to see i it stored a failure code for one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com