Chevrolet K2500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(27)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(27)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet K2500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Chevrolet K2500V6-4.3LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1992 Chevrolet K2500V8-6.5L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet K2500V8-6.2L DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Chevrolet K2500V8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Chevrolet K2500V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Chevrolet K2500V8-7.4LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Chevrolet K2500V8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1993 Chevrolet K2500V8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet K2500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0

Franky

29 years of experience
43 reviews
Franky
29 years of experience
Chevrolet K2500 V8-5.7L - Battery - Glen Ellyn, Illinois
Trying to get through the website was a bit of a challenge and almost gave up. After working with Franky my mechanic i was so glad i push through not so user friendly site. Franky was awesome!

Russell

24 years of experience
356 reviews
Russell
24 years of experience
Chevrolet K2500 V8-5.7L - Car is not starting - Vancouver, Washington
Russ was very helpful, knowledgeable , and found the problem quickly.

William

30 years of experience
49 reviews
William
30 years of experience
Chevrolet K2500 V8-5.7L - Car is not starting - Glendale, Arizona
Great guy and the truck is running super!

Cameron

14 years of experience
95 reviews
Cameron
14 years of experience
Chevrolet K2500 V8-5.7L - Alternator - Kent, Washington
Cameron was awesome. He arrived early and displayed professionalism, courtesy and had my alternator and belt replaced in 30 minutes. Would definitely use his services again, highly recommended. A+

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0
Number of Chevrolet K2500 services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P0797 OBD-II Trouble Code: Pressure Control Solenoid C Stuck On
P0797 means that there is a problem in one of the electronic pressure control solenoids or circuits due to a faulty solenoid, or low or dirty fluid.
How to Troubleshoot a Parking Brake or Emergency Brake That Won't Engage
Emergency brakes won't engage if the parking brake lever or pedal is out of adjustment or there are worn brake shoes or brake pads.
The Worst Cities to Break Down In
Here's where you'll find the highest car repair costs, worst public transportation, and congestion.

Check engine light came on, diagnostic was done and came up with codes saying pressure control solenoid 2,3, & 5 are shut off.

Low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) is a major cause of transmission failures. Your pressure control solenoids turned off to try to prevent damage to transmission components like clutches etc. Unfortunately, the damage is done and changing the fluid will not help,...

Heat Won't Blow at Floor

There is an actuator that controls the vent doors inside the system that open and close to direct air flow. When this is not working properly, this can improperly engage different vents intermittently or sometimes not at all. I would...

The ABS and Parking light signal in the dashboard of my car what are the meaning

The abs and parking brake lights (https://www.yourmechanic.com/services/abs-light-is-on-inspection) coming on typically indicate a fault in the anti-lock braking and/or the traction and stability control systems system. These systems rely on a variety of sensors and switches for input. For instance, wheel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com