Chevrolet K2500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet K2500 Car Thermostat Replacement is $206 with $66 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chevrolet K2500V8-5.0LService typeCar Thermostat ReplacementEstimate$322.74Shop/Dealer Price$368.28 - $496.78
1994 Chevrolet K2500V8-6.5L Turbo DieselService typeCar Thermostat ReplacementEstimate$335.99Shop/Dealer Price$385.32 - $529.20
1991 Chevrolet K2500V8-6.2L DieselService typeCar Thermostat ReplacementEstimate$335.99Shop/Dealer Price$385.35 - $529.24
1994 Chevrolet K2500V8-6.5L DieselService typeCar Thermostat ReplacementEstimate$335.99Shop/Dealer Price$385.35 - $529.24
1995 Chevrolet K2500V8-7.4LService typeCar Thermostat ReplacementEstimate$309.55Shop/Dealer Price$353.77 - $478.94
1993 Chevrolet K2500V6-4.3LService typeCar Thermostat ReplacementEstimate$313.73Shop/Dealer Price$357.66 - $484.97
1996 Chevrolet K2500V8-5.0LService typeCar Thermostat ReplacementEstimate$686.23Shop/Dealer Price$823.16 - $1229.75
1996 Chevrolet K2500V8-6.5L Turbo DieselService typeCar Thermostat ReplacementEstimate$335.99Shop/Dealer Price$385.35 - $529.24
Show example Chevrolet K2500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Daniel

6 years of experience
208 reviews
Daniel
6 years of experience
K2500 1998 - Check Engine Light is on - Chicago, IL
Daniel did a great job. He showed up on time, found everything that was wrong with my vehicle and he explained everything he found.

Yoel

5 years of experience
187 reviews
Yoel
5 years of experience
K2500 1995 - Engine Mount - Upper Darby, PA
He is a very good mech but you do not give him enough support-Your version of Mitchell is inadequate - He had to borrow a big jack and tall jack stands plus it is a 2 man job- I helped him so the job got done and you got your money other wise the job was not getting done- I worked 18 years in service management and been doing mechanical work for 40

Chris

15 years of experience
546 reviews
Chris
15 years of experience
K2500 1988 - Thermostat - Boring, OR
Arrived on time, job was done correctly from what I can see right away. Very pleased with this experience and I would try this again.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Chevrolet K2500 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

What Does the Washer Fluid Low Warning Light Mean?
The washer fluid low light warns you when your windshield wiper fluid needs to be checked and refilled soon.
P0757 OBD-II Trouble Code: Shift Solenoid B Stuck On
P0757 code means the PCM has registered an irregularity within the shift solenoid B often due too hydraulic blockages internally or malfunctioning.
How to Transfer a Car Title in Vermont
In In the state of Vermont, all changes in vehicle ownership must be accompanied by a change in the name on the title. The title transfer process is relatively simple and straightforward, but there are several steps that must be...

The van stalls, jerks and hesitates

GM has a TSB out concerning clogged injectors (https://www.yourmechanic.com/article/what-causes-fuel-injectors-to-get-clogged-or-dirty) that may cause all of the rough running/no start symptoms that you are experiencing. A professional fuel injector cleaning may help correct these various engine running issues. The procedure does require...

Can I add water or fluid to the reservoir till I can get a flush and fill?

Yes, you can, and should, add coolant to the reservoir to make sure the engine cooling system does not run low. Add only a 50-50 (water-antifreeze ratio) coolant mix to the overflow tank, particularly if it is winter season. If...

Didn't answer

We do apologize for the inconvienience. Sometimes there are a very large number of questions coming in at once. Therefore this can lead to questions taking a little bit longer to be answered than normal. We try to get all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com