Q: where is the camshaft position sensor located on a 2005 scion TC

asked by on January 06, 2018

where is the camshaft position sensor on the 2005 scion TC

My car has 120550 miles.
My car has an automatic transmission.

Hi Manuel. Thanks for contacting us today. The camshaft position sensor is located on the driver side of the engine bay, attached to the side of the cylinder head. Since we can’t attach images to show you the exact location, you should probably buy a service and repair manual for your Scion. This will also give you instructions on how to correctly replace it.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car died while idling at drive-thru with no warning and will not restart.
Start with the basics. Have your battery tested (https://www.yourmechanic.com/article/how-to-check-a-car-battery) so it can be verified as good and at least 75% charged. Ensure that your battery cables are clean and tight. The electrical issues you've had do seem they may be...
Ticking noise
Hello there, a few different faults can cause the vehicle to have this ticking noise. The most common faults would include an issue with the flywheel, belt tensioner (https://www.yourmechanic.com/services/drive-belt-tensioner-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), water pump (https://www.yourmechanic.com/services/water-pump-replacement), or engine mechanical issue. I'd recommend...
How difficult is it to replace a valve lifter and/or is it something worth taking to a mechanic?
Hello, thanks for writing in. Having lifters and valves replaced is best left to the professionals. Many times this can involve removing the cylinder head from the engine which will have an affect on the timing. Special procedures need to...
How safe is it to drive with a torn caliper boot?
Hello, thanks for writing in to YourMechanic. If the caliper boot is torn open then you will get dirt, debris, water, and road salts in the caliper piston surface. The caliper may seize or tear the caliper piston seal causing...
Coolant leaking from intake manifold
Hello and thanks for contacting YourMechanic. Intake gaskets (https://www.yourmechanic.com/services/intake-manifold-gaskets-replacement) will seal, however, it is recommended to add some RTV (room temperature vulcanization) silicone to the gasket to seal it on the heads (https://www.yourmechanic.com/article/how-to-engine-block-sealer-to-repair-a-head-gasket-leak-by-eduardo-ruelas). I recommend using the blue water resistant...
I have a 1997 dodge ram 1500. It is not getting up to speed and acts like it has no power.
Hi there. Check the fuel pressure on the fuel rail and see if there is at least 30 psi. If the fuel pressure is low, then either the fuel filter is plugged or the fuel pump is not producing enough...
Can I drive over 65 mph with traction control on? Or should I turn traction control off?
Traction control helps with the stability of the vehicle in all conditions and works with the ABS system to ensure that the vehicle can stop fast and keep the vehicle in a safe condition on any roadway condition. I recommend...
Check engine light came on and oil gauge at 0. But digital dash reading shows 58% life remaining. Oil level is good. Bad sensor?
Hi Megan. Thanks for contacting us today. If the check engine light has come on, this could indicate an oil pump failure, or oil sensor issue. In order to correctly diagnose the root issue, an on-site inspection would be required...
Which cylinder goes to what number on the coil pack on 2003 2.3l ford ranger, 1 plug per cylinder?
If your Ranger engine is transverse mounted, the firing order is 1-3-4-2. Cylinder number 1 is on the passenger side. The coil terminal nearest the passenger firewall is for Cylinder number 1. The terminals are then read clockwise from that...

Related articles

A Buyer’s Guide to the 2012 Scion iQ
The The 2012 Scion iQ delivers the type of driving experience you would expect from a microcar. The higher fuel economy coupled with a tight turning radius provides an excellent vehicle for those who do a lot of city driving...
A Buyer's Guide to the 2012 Scion tC
In In general, Scion has been a car manufacturer that continues to climb in popularity. Perhaps no model exemplifies this more than the 2012 Scion tC. Back in 2011, Scion gave this vehicle a facelift and, by the following year,...
Understanding the Scion Maintenance Required and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Scion Maintenance Required light indicates when your car needs service.