Q: No fuel or spark getting to engine
I just replaced the cam and crankshaft sensors. Now, the car isn't starting. It seems like there is no fuel or spark getting to the engine. I think one of the sensors isn't working.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Key only spins in lock
It sounds like either your door lock cylinder or the linkage inside the door has come apart or failed. The linkages inside your door are connected by pieces of plastic essentially. It is possible that one of these connections has...
Transmission mount cracked
The transmission mount would need to be replaced, and all the other mounts checked for cracks as well. It is normal for the mounts to crack or break over time from wear and tear. I recommend that you have a...
Bmw 2005. e90 320i N46, have cel on, code is p0013. Engine is stalling, consumption is higher. What do you suggest?
Hello. P0013 (https://www.yourmechanic.com/article/-p0013-obd-ii-trouble-code-b-camshaft-position-open-or-short-in-oil-control-valve-ocv-bank-1-by-jay-safford) is the code for a malfunction of Camshaft Position Actuator Circuit B (Bank 1). It may be possible that there is an issue with the cam actuator or the Vanos oil control solenoid. If either of those...
Oli consumption
As use of that, much oil between oil changes isn't too bad. Honestly it could be that the oil wasn't completely filled and it was left a little lower than needed. Generally speaking oil changes with conventional oil should be...
Car died while driving now won't crank
At 150 thousand miles it really could be anything. I'm not clear on weather you have a car that will not start or one that will not crank. A car that will not crank may have problems in the charging...
My steering wheel stays to the right when I drive straight.
The power steering gear is held to the frame using two large bolts going through the rack and pinion mount bushings. The bushings will get worn or oil soaked and will allow the entire rack and pinion to shift to...
Car makes whining noise when I start in the morning
Hello, thank you for writing in. The vehicle will make noise when cold for several reasons. If you belts are loose at all, it may take them a while to warm up and grip the pulleys the way they are...
Car missing and poor pick up
Hello, An engine can ping (or knock) due to an improper combustion process. A "spark knock" is the result of combustion occurring too early. Early combustion can occur from carbon buildup inside the combustion chamber, a lean air/fuel mixture, and...
Air conditioner makes clicking sound when truck turns on, low air pressure unless max AC is used
When the engine turns on, if the A/C switch is off, the compressor clutch is not engaged so the only "noise" should be from the compressor pulley freewheeling. If the air flow is too low at the lower blower speeds,...
Related articles
When Does the Gas Light Turn On in My Car?
Going Going to the gas station is a chore and many of us wait until the gas light is on and the tank is nearly empty. But waiting until your fuel tank dries up is a bad habit, and the...
Symptoms of a Bad or Failing Speed Timing Sensor
Common signs include the transmission having difficulty shifting, Check Engine Light coming on, vehicle not starting, and loss of engine power.
How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.
Browse other content
Services
Cities
Estimates