Q: location of bank 2 camshaft position sensor B on 2012 toyota tundra 4.6L

Something like this is usually caused by a faulty headlight switch or a shorted wire going to the headlights. The source of the problem needs to be inspected so I would recommend having this looked at by a mechanic so...

Hello. The P0440 code (https://www.yourmechanic.com/article/p0440-obd-ii-trouble-code-evaporative-emission-control-system-malfunction-by-jay-safford_2) you are getting is for an EVAP system problem. This code is generic so the system needs to be checked. Most of the time it is because of a system leak such as a fuel...

The noise may be the lifters, but the problem may not be the lifters. Your engine's heads have very small passages that feed oil to them through the heads, and, if the parts are being starved of oil, then the...

This may be related to a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at...

Hello. There can be several components that will cause the heater (https://www.yourmechanic.com/services/heater-is-not-working-inspection) to fail. Always start with the simple options first. The heater relies on hot coolant from the engine entering the heater core where air is pushed over it...

Hi there. The noise that you are hearing is commonly known as 'Dieseling'. When this happens, check the ignition switch alignment and see that the switch is turned completely off. If the switch is turned off, then while the engine...

The cylinder head gasket mating surface must be machined flat to ensure a proper seal and the exhaust manifold mounting surface may be machined if there is an exhaust leak there from the cylinder head warping. A few small pits...

There are many causes of hard starting but illustrative ones are a faulty engine coolant temperature switch (sensor), air induction system problems such as a faulty idle air control valve, worn spark plugs, inadequate fuel delivery or pressure (clogged fuel...

Hi there. One item that is often overlooked is the heater core. The coolant flows from the engine, through the heater core to supply heat for the heating system. It is possible that the heater core is blocked with debris;...