Q: Favorite green car for restoration

asked by on May 02, 2016

What would be your favorite green car restoration project?

It would probably be an old Shelby Cobra from the ’60s. That would be a fun one to restore. There are not many of them left, original ones at least. That would be a fun car to have even though they are gas-hogs -- something that you can run on the weekends.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

My headlights burn out constantly
This is a common problem for this generation of Outback. The short life of the bulbs has been attributed to the bulbs being illuminated almost constantly. A secondary cause is that the bulbs are being touched during install. The Outback...
Smog pump making noise
Hi there. You’re on the right track. When the belt is off, spin each part by hand and try to reproduce the noise. Use a drill if you are uncertain at slow speeds. Whichever part is noisy, usually needs replaced....
Click in steering wheel while turning
Realize that steering columns are a column, but they still need to flex. They are turning and they don't go straight to the steering box at angles. So they have universal joints, and a lot of times those universal joints...
Engine check light, rough idle, loss of power.
Hello. If your filter is over oiled and the oil got onto the hot wire of the air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), then that can cause it to burn out. A scan tool could be used to check the reading of...
Car is stalling - 1994 Lexus GS300
This may be related to a dirty or faulty idle air control valve. This is a unit that reads the air intake as it is mixed with fuel before entering the engine. This information is then relayed to the computer...
Car cranks but won't start below 10 degrees F
Hello, thank you for writing in. The cold weather (https://www.yourmechanic.com/article/how-to-start-a-car-in-cold-weather) is a hard battle to win. There are a few things you can do to help prevent the cold from effecting the engine so much when it drops that low....
Serial communication malfunction automatic transmission. How do I repair problem?
Hello - please provide more details: problem codes causing Check Engine, year, make and model of car. Thanks for thinking of YourMechanic!
Transmission won't move
Be sure the wiring harness is connected to the transmission, although in drive the manual valve (in the transmission valve body) should at least get you into 1st gear. Check the fluid level. If fluid is really low, the transmission...
Thumping noise when turning
What you are describing sounds like a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) that may be starting to fail. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the...

Related articles

What Is the Difference Between a Diesel and a Gasoline Engine?
Gasoline and diesel engines use similar components but ignite fuel differently. Gasoline engines use spark plugs, while diesels rely on compression.
Do You Really Need Premium Gas?
You’re You’re given the choice every time you pull up to the fuel pumps - regular or premium gas (https://www.yourmechanic.com/article/regular-gas-versus-premium-gas-what-s-the-difference-and-should-i-care). You’ve heard all the hype about premium fuel and the benefits it provides: Better fuel efficiency Corrosion prevention Engine knock...
Why You Should Always Keep a 1/4 Tank of Gas in Your Car
Everyone Everyone knows that keeping gas in your vehicle's fuel tank is a must. But you may wonder what the minimum amount of gas is that you should always have in your fuel tank. Some experts claim that you should...