Yes, [Ram 2500](/topics-ram-2500/) P0371 gear 1 incorrect...
Responses
Keiphun Sowell
245 days ago
Hello, My name is\*\*\*\*\*'m the Technician that will be assisting you today.
I co-own a Restoration/Advanced troubleshooting shop. So My hours on here vary day to day.
**If I respond to your question that means I will be online for at least 30 minutes. If you respond after that time period, I will see your message and review it. But will not respond until I back get online.**
I do not work for Just Answer, They have just allowed me to use their platform to help customers like yourself.
**You may receive a automatic call request, which is a good option if you don't like texting. But I will almost never have the time to place a call. If I'm assisting you and we find a call is the best route. I will call you then.**
**Also under no circumstance do you post personal information other than your first name. If personal information is required (like your phone number) Just Answer has a secured way to exchange information.**
Its a pleasure to get to assist you. Whom do I have the honor to be speaking with.
Hello, Which engine do you have? Thanks
Customer
245 days ago
6.7L cummins
Keiphun Sowell
245 days ago
Thanks one moment.
Do you have any other codes?
Normally the incorrect ratio codes means something internal to the transmission has failed. Would need to do some test to verify if you do not have any other codes.
Do you have a pressure gauge?
Customer
245 days ago
P0871, P203F
Keiphun Sowell
245 days ago
Thanks
Keiphun Sowell
245 days ago
Okay, So we do need to check the transmission line pressure to see what's going on.
The p203f is a separate issue.
Customer
245 days ago
Ok how
Keiphun Sowell
245 days ago
Please see the attachment on how to test the transmission pressures.
Please follow up with your findings.
Please let me know if you have any other questions or concerns on this issue. Thanks
Customer
245 days ago
Thanks Keith.
Keiphun Sowell
245 days ago
My pleasure
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Loud noise when car’s running, probably the exhaust
Many of these cars have issues with rusted exhaust pipes. The pipes seem to start rusting at the weld seams and can rust through in a few years, especially if the car is located in a state that uses salt...
How do you set the parking brake?
Setting the parking brake ensures that your car stays where you park it on an incline and also takes the load off the transmission. Never leave your car only in park on a hill, or in gear on a hill...
Manual clutch not engaging
If by the clutch not engaging you mean the pedal is going to the floor, you might be having slave cylinder issues. The slave cylinder is a hydraulic component that works off your clutch pedal. It disengages the clutch when...
Key not turning all the way
If you are having difficulty turning the key in the ignition switch, this may be a sign that the ignition lock cylinder, or perhaps the key, are worn and in need of replacement. This repair requires disassembling of the steering...
Rear passenger wheel gets very hot. Do you know what it could be?
You will need to lift the wheel (https://www.yourmechanic.com/article/how-to-properly-use-a-floor-jack-and-jack-stands-by-brent-minderler) off the ground and see if the wheel is able to turn freely. If it does not, then the wheel will need to be removed and the caliper bleeder screw opened to...
Driver side rear shock is leaking oil the set only has about 2500 miles on them? they are coil over shocks.
Hello. A shock is not always bad, but if you see some residue oil leaking from the shock then it may not be functioning fully. If you see a really wet and dripping shock, then it should be replaced. The...
My car won't start up after sitting for awhile unless I apply gas. I don't know if it is my fuel pump relay or my fuel filter.
Sometimes the idle control valve will stick closed and with the throttle closed little to no air gets into the engine when trying to start the engine. You should have the throttle body and idle control valve cleaned to see...
My gas gauge is always on empty it does not register when I fill my tank up.
This is a problem likely related to your fuel tank sending unit. The fuel gauge sending unit (https://www.yourmechanic.com/services/fuel-gauge-sender-replacement) is a small float type component (or sensor) inside your fuel tank that measures the level of the fuel inside the tank....
My Chevy Malibu 2013 while driving and I came to a complete stop in the car started to shake really bad and then shut off and then
Sudden loss of engine power, and then a non-functioning starter, raises the possibility of no oil in the engine. In particular, if the engine was seized, the starter would not work in any attempt to re-start the engine. But there...
Browse other content
Services
Cities
Yes, [Ram 2500](/topics-ram-2500/) P0371 gear 1 incorrect ratio Mechanic's Assistant: What is the model/year of your Ram? 2016/2500 4×2 Bighorn Mechanic's Assistant: Are you fixing your vehicle yourself? What have...
Yes, [Ram 2500](/topics-ram-2500/) P0371 gear 1 incorrect ratio Mechanic's Assistant: What is the model/year of your Ram? 2016/2500 4×2 Bighorn Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Drain and filled transmission fluid. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Transmission fluid pressure sensor/switch C circuit Range/Performance