Drives in 2nd and reverse
Responses
Jaybird61
277 days ago
Hi, my name is Jay
P0700 is an information code indicating another code is stored and should be fixed first and then code cleared.
P0750 is for an issue with the low, reverse solenoid and may be inoperative.
I recommend having the shift solenoids, filters and fluid replaced and clear codes.
Customer
277 days ago
WhaT kind of expense are we talking
Jaybird61
277 days ago
It calls for about 2.0 hours labor to replace valve body. The valve body parts will range around $300. Plus the filter and filter. This repair will be in the range of around $600. It will vary depending on local labor and parts pricing.
Customer
277 days ago
Thanx
Jaybird61
277 days ago
They will also have to do a transmission relearn with computer scanner after repairs so make sure they can do this after repairs are done. Some shops do not have a scanner that can do this.
Your welcome. Glad to help.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What do the controls do on the dual automatic temperature control system?
If your car is equipped with a dual automatic temperature control system, it allows you to set a different temperature for the driver side and passenger side. Once you’ve set the temperature, the system will automatically maintain it until you...
Car running and idling rough
Hello. It is possible that your vehicle would need a complete tune up and/or a Check Engine Light inspection. I would have a certified mechanic scan your vehicle's computer for codes to diagnose your Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). These codes...
Brake lights stay on
The most common cause for the lights to stay on is the brake light switch. I recommend that you have a mechanic, such as one from YourMechanic, come by and run an inspection to diagnose your brake light issue (https://www.yourmechanic.com/services/parking-brake-light-stays-on-inspection)....
I've changed my water pump, thermostat, thermostat housing, fan clutch, radiator and my ram is still overheating to about 250 degr
You need to have the cooling system checked to see if there is combustion gases getting in the cooling system, causing it to get hotter than it should. Since you have overheating problems you may have a blown head gasket...
Car continues to run after taking the key out of ignition
If the rest of the vehicle is staying powered up as well (radio, lights, etc.), then there may be a problem with the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement). Otherwise, there may be a shorted circuit allowing the fuel pump and ignition system...
The driver side reverse light won't work, only the passenger side light works. I've changed all the bulbs and I still can't get it to come on.
I would suspect that that there is a problem with the socket for the light bulb (https://www.yourmechanic.com/services/reverse-light-bulb-replacement). Corrosion will build up in the bulb socket and not allow power, or ground, to get to the bulb. If the bulb is...
My car slowly came back to a stop and now it won't start. Mechanic said it's the timing belt or motor.
Hey there. It is very possible that your timing belt (https://www.yourmechanic.com/services/timing-belt-replacement) may have broken. It is also possible that some internal damage may have occurred to the engine. I would recommend having another mechanic give you a second opinion on...
When running the radio and/or HVAC, the car (while creeping to a stop) will almost stall and all lights will dim and the radio cuts off.
Hi and thanks for contacting YourMechanic. Look under the vehicle to see if the motor mounts (https://www.yourmechanic.com/services/engine-mount-replacement) are broken or missing. This can cause the engine to tilt too much causing a short in one of the high voltage wires....
How much should it cost to replace the entire rear end? 2008 Toyota Yaris
Hi there - this task is best handled by a collision repair estimator at a reputable paint and body shop. S/he is trained to evaluate visible and not-so-visible damage, and the costs to repair. Contact a reputable paint and body...
Browse other content
Estimates
Services
Drives in 2nd and reverse Mechanic's Assistant: What is the make/model/year of your car? 06 dakota Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Finding a mechanic Me...
Drives in 2nd and reverse Mechanic's Assistant: What is the make/model/year of your car? 06 dakota Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Finding a mechanic Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Engine codes p0700 & p0750