I have an 03 dodge [ram 2500](/topics-ram-2500/), the ste...


I have an 03 dodge [ram 2500](/topics-ram-2500/), the steering gear has 4 bolts, but no adjustment screw, why? How do I adjust Mechanic's Assistant: Have you checked the fluids? Yes Mechanic's Assistant: What year...

I have an 03 dodge [ram 2500](/topics-ram-2500/), the steering gear has 4 bolts, but no adjustment screw, why? How do I adjust Mechanic's Assistant: Have you checked the fluids? Yes Mechanic's Assistant: What year is your Ram 2500? 03 Mechanic's Assistant: Are you fixing your Ram 2500 yourself? What have you tried so far? Yes, adjusted drag link, replaced stabilizer bar

Automotive Expert
Hello and welcome! I ask that you please provide as many details ans possible and communicate with me so we can make your experience here worth 5 stars! I am around most days but not every minute of every day. If you reply while I am offline, I will respond when I am next online. You may be prompted to accept phone service. This is a automatic prompt I have no control over.I do not offer this service, nor do I make the calls but other technicians may make a call and help you with your vehicle needs if you wish to accept this service. What adjustment are you trying to get out of the steering?

It has too much play in it. I have tried several things and was going to adjust the steering gear but it has no adjustment screw
Automotive Expert
ok let me pull up a few things ill be right back

Ok
Automotive Expert
Ok so there should be a adjustment nut on the opposite side of where the pit man are is mounted if not that is not a adjustable part, the aftermarket ones do provide a adjustment and the part will need to be replaced if you cant get it to adjust using this procedure below https://www.dropbox.com/s/rzr0xvzz4abay40/sun3.pdf?dl=0

Ok the opposite side is the top side and there isn't an adjustment nut. I was afraid it would need replacing. Thanks
Automotive Expert
Your very welcome!

What others are asking

Muffler clogged
A muffler can become clogged from catalyst material breaking loose and working it's way down the exhaust or an internal failure. Some mufflers and resonators are filled with fiberglass that absorbs some of the noise in the exhaust system. If...
When I drive My steering is turning left and right without turning I don't know what is the problem
Hello, thanks for writing in about your 1997 Nissan Maxima. From what you've described you should have the front tires checked. One of them may have a broken/shifted belt. The tire basically becomes egg-shaped rather than round and can potentially...
Heat/AC blower turns off and on
Hi there. Check the switch for any loose wires or shorts from the blower motor switch (https://www.yourmechanic.com/services/blower-motor-switch-replacement) to the ignition switch. Check the condition of the wire connections for an corrosion and see if the wires are loose on the...
Oxygen sensor
The code P0132 is for the O2 sensor in the rear manifold of the engine. The code is for a short to power and should be checked to see if the harness is shorted. You should not have the sensor...
New battery and alternator but there is still no power in my 204 Xterra onve I turn it off.
Hi there. It sounds like you either have a defective alternator or there is another issue within the circuit for the charging system. I usually start by checking the output of the alternator. If it is not putting out the...
AWD light stays on 2009 Nissan Murano
Hello - check the fuse(s) for your AWD (https://www.yourmechanic.com/article/how-all-wheel-drive-works) first. The engagement mechanism is an electrical solenoid in the transfer case, and it's possible that the solenoid has over-loaded, or failed. For additional assistance, I recommend a AWD problem (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection)...
How do I replace spark plugs on a 1991 Plymouth Acclaim
Hi there. If you have not completed this type of job before, I would recommend one of two things. First, purchase a service and repair manual for your 1991 Plymouth Acclaim online; as it will have detailed instructions and what...
front driver tire area makes rattling noises when driving over any size bump or whole on the road
Rattling noises in the front suspension could be due to strut faults, loose bushings, a loose sway bar or links, or any other suspension component that is no longer tightly secured to the frame. Another possibility is loose brake parts...
Can the positive cable be split with a dual post battery on a 1996 Sierra
Yes you can split them and put them on different posts as long as they both get battery power they will work.