In my 82 el camino, first and second gear work fine, but ...
Responses
AutoDoc1
277 days ago
Hi! My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out.
Thank you for taking the time to let us help you out with this problem and hopefully we can sort it out quickly.
Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem.
Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
If third gear is revving up high then the clutch pack is worn out and you will have to rebuild the transmission. Of course make sure the fluid is in good shape and full but if all the other gears work good then the clutch pack discs are slipping and causing it to rev high.
My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. If I’m not online at the time, I will respond ASAP when I get back.
Customer
277 days ago
would i have to rebuild the entire thing? i'm on a pretty strict budget here
AutoDoc1
277 days ago
You would have to buy a rebuild kit to get the clutches so it wouldn't be any more expensive. The 3rd gear clutches are in the back of the transmission so everything else would have to come out. You might as well change the other clutches also.
Customer
277 days ago
how much would that be do you think?
AutoDoc1
277 days ago
You can get a rebuild kit for around $400. The labor price would depend on how much they charge. If they have to pull the transmission then it would be about $900. If you bring them the transmission then they would charge about $500 labor.
Customer
277 days ago
would i be able to drive the first two gears without wrecking it?
AutoDoc1
277 days ago
Yes. Just don't let it rev too high so you don't blow up the [engine](/topics-engine-chevy/).
Customer
277 days ago
ok nice
AutoDoc1
277 days ago
Hopefully you can get it sorted out quickly.
Customer
277 days ago
yeah i'm gonna have to save a bitthank you
AutoDoc1
277 days ago
You're very welcome.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What are some reasons why the remote vehicle start won’t work?
The remote vehicle start feature allows you to turn on your vehicle using only your remote keyless entry (RKE) transmitter. However, the remote vehicle start will not work if any of these conditions are met: 1. The RKE transmitter is...
Somebody tried to steal my truck, but only destroyed the ignition lock cylinder.. how can this be repaired?
It may have had the ignition switch damaged as well, which would cause the truck to not power up or start. You should check to see if it was damaged during the attempted theft. If it was, it will need...
Steering wheel vibrations can be seen and felt
Hi there. If the steering wheel is vibrating at this speed and it is occurring whether you apply the brakes or not, then you more than likely have a tire that is failing. When a tire begins to separate, this...
Tail lights suddenly not working.
You have a broken brake light switch connector wire. The green wire with a red stripe goes to the brake lights and will cause the brake lights not to work. You may also have a problem with the turn signal...
Engine shudders when not moving, check engine light on - 2003 Toyota Echo 1.5 L 4-cylinder
ANY time a Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on, the first thing you need to do is get the computer scanned. Autozone or advance will actually do this for free so you don't have to purchase anything. Shuddering could be...
Someone pulled distributor coil cord while engine running. Now the car can't start.
This may have been caused by many different things such as a faulty crank position sensor, a bad pickup inside the distributor or many other things affecting the ignition's ability to produce a spark. I would recommend having an expert...
Gear shifter not aligned correctly, stuck in gear 2001 Ford Ranger
Hello - whether for a manual or automatic transmission, your Ranger uses cable linkage between the shifter and the transmission. Over time, both the attachment points, the cables themselves, and the pivot bushings in the linkage become worn - sometimes...
How many motor mounts? 2005 Saturn Relay
Hello - for your model Saturn with the V6, there are 6 motor/transmission mounts (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount) in total. For assistance with this task, I would recommend an engine/transmission mount replacement (https://www.yourmechanic.com/services/engine-mount-replacement) by a mobile, professional mechanic, such as one from YourMechanic,...
Lights flickering when the throttle is pressed and the turn signal is on.
The issue seems to be with the multi-function switch for the turn signals. The switch is shorting out inside it on the high beam selector which is effecting all of the lights. I recommend replacing the multi-function switch. If you...
Browse other content
Maintenance
Estimates
In my 82 el camino, first and second gear work fine, but when i get into third it revs up high Mechanic's Assistant: How many miles are on the car? Have you noticed any fluid leaks lately? Around 70 thousand, and no leaks...
In my 82 el camino, first and second gear work fine, but when i get into third it revs up high Mechanic's Assistant: How many miles are on the car? Have you noticed any fluid leaks lately? Around 70 thousand, and no leaks Mechanic's Assistant: What is the make/model/year of your car? Chevy el camino 1982 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I just noticed the problem. Bought the vehicle recently