I have a 1997 chevy 1500 replaced ignition switch now I'm...


I have a 1997 chevy 1500 replaced ignition switch now I'm not gettg Mechanic's Assistant: Has the Chevy been stalling out? Not getting voltage to coil or fuel pump security light is not on Mechanic's Assistant: Wh...

I have a 1997 chevy 1500 replaced ignition switch now I'm not gettg Mechanic's Assistant: Has the Chevy been stalling out? Not getting voltage to coil or fuel pump security light is not on Mechanic's Assistant: What is the model of your '97 Chevy? 1500 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Tired resetting computer Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Not that I can think of

Automotive Expert
hello and welcome to JustAnswer, my name is\*\*\*\*\* will try to help you! you have to check your Crank Position Sensor, if this goes bad you will have no spark or fuel pressure, but also I strongly recommend you to double check the ignition switch to make sure is installed correctly!

I checked and I have no voltage going to the crank position sensor
Automotive Expert
please check all your fuses!

Checked all fuses still no voltage to crank position sensor
Automotive Expert
can you provide me with your VIN so I can get a wire diagram?
Automotive Expert
the one your checking is the one on the [engine](/topics-engine-chevy/) block?

What others are asking

Electrical or transmission problems with Hummer
Hi there. This vehicle is known for having a history of electrical issues. From the symptoms you are getting it sounds like a bad ignition switch or a failing body control module. Most of the time it is the ignition...
MAP sensor
Hello. MAP stands for manifold absolute pressure. So the answer to your question would be that it is the manifold absolute pressure sensor that there is something wrong with. The map sensor reads the pressure in the manifold and sends...
Can you diagnose my car without a check engine light?
Hi there. In short, yes; it's possible to diagnose a problem with a vehicle even if the check engine light does not illuminate. A professional mechanic would start by downloading any error codes store in your 2005 Ford Explorer's computer....
Power door lock diagnosis
Hi there. The driver door has a door lock release solenoid that operates the latch. This solenoid is attached to the door lock latch. The plastic clip that you removed was for the return of the door lock. I recommend...
Interior lights work but car won't start and power locks won't work 97 Honda passport
You possibly have a dead battery. Batteries that are "partly" dead can often still run lights, dash lights and so forth but will not have enough power to run the starter motor and start the car. The very first thing...
clicking noise when turn signal is off
Hi there. If you are hearing a repetitive clicking sound, it is possible that it's coming from the engine compartment. In some cases, this can be caused by a loose serpentine or drive belt or pulley, a timing belt that...
Can you pass emissions with a turbocharged car with odb-2 if it did not originally come with a turbocharger?
Can you pass emissions with a newly turbocharged car that has ODB-2 that does not come with a turbocharger from the factory? It is illegal to modify any factory installed emissions system on a motor vehicle. Adding a turbocharger...
Can I change my car oil from 5w-20 to 10w-20 because the oil is burning quicker?
The effect on oil consumption will be zero to negligible (these are both SAE 20 weight oils at operating temperature) and, in any event, any beneficial effect will be offset by the reduction in the efficiency of operation of the...
What kind of oil do I need for my 2008 Volkswagen Passat turbo
You can use 5w30 or 5w40 full synthetic oil that is VW certified only. This is VW specified in the owners manual.