Volvo S90 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Volvo S90 Mass Airflow Sensor Replacement is $269 with $174 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Volvo S90L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$462.29Shop/Dealer Price$559.12 - $827.09
1997 Volvo S90L6-2.9LService typeMass Airflow Sensor ReplacementEstimate$442.29Shop/Dealer Price$539.13 - $807.12
Show example Volvo S90 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Peter

27 years of experience
86 reviews
Peter
27 years of experience
Volvo S90 L6-2.9L - Check Engine Light is on - Fresno, California
Very happy with his service, very knowledgeable.

Jeremy

20 years of experience
597 reviews
Jeremy
20 years of experience
Volvo S90 L4-2.0L Turbo - Serpentine/Drive Belt - Lake Worth, Florida
Great job!

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Volvo S90 L6-2.9L - Oil Change - Daly City, California
Grzegorz was awesome, thorough, and very knowledgeable... He did oil change for my car, took pictures and identify all problems with the car in his 50-point inspection report. Would highly recommend Grzegorz for your next automotive service.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Volvo S90 L6-2.9L - Brake Pads Replacement (Front, Rear) - Chicago, Illinois
VERY OUTSTANDING WORK !!!!!!!!!!!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Volvo S90 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

What Sensors Make the ABS Work?
When When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system...
How to Replace the Speedometer Sensor on Most Cars
The speedometer has a sensor that fails if the speedometer or cruise control do not work, the Check Engine Light comes on, or the vehicle loses power.
How to Replace a Washer Fluid Level Switch
The washer fluid level switch fails when the Windshield Fluid Warning Light stays illuminated or there are unusual noises coming from the washer pump.

Car misfires after new spark plugs and multiple replacements

Hey there, thanks for writing in about your 1987 Pontiac Fiero. I have the 2.8L engine in my '87 Cavalier Z24 and I know it well. I'm guessing your Fiero has the same engine. One of the best ways to...

Bought cheap crank shaft sensor, now a code is coming on.

Hi - regarding the crankshaft sensor - if the new one (cheap or otherwise) is not causing any misfire, it is just fine for now anyway. What code is "still coming up"? That is fairly important in the diagnostic process....

Engine light lids

The knock sensor is located on top of the engine beneath the intake manifold which must be removed to gain access. With regard to diagnostic trouble code P0325 (https://www.yourmechanic.com/article/p0325-obd-ii-trouble-code-knock-sensor-malfunction-sensor-1-bank-1-by-spencer-clayton) that code does not mean the knock sensor has failed. All...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com