Volvo 760 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Volvo 760 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Volvo 760L4-2.3L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1983 Volvo 760L6-2.4L DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Volvo 760L4-2.3L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Volvo 760L4-2.3L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1985 Volvo 760V6-2.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Volvo 760V6-2.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 Volvo 760L4-2.3L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1988 Volvo 760V6-2.8LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo 760 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(5)

Rating Summary
4
0
1
0
0
4
0
1
0
0

Deane

11 years of experience
340 reviews
Deane
11 years of experience
Volvo XC70 L5-2.5L Turbo - Car starts and then dies - La Mesa, California
Great mechanic. Hose from turbo came off . He put it back on and tightened it and let car run for a while. Making sure this was the problem.

James

8 years of experience
128 reviews
James
8 years of experience
Volvo S40 L4-1.9L Turbo - Car starts and then dies - Atlanta, Georgia
Friendly, Professional.

Matthew

12 years of experience
183 reviews
Matthew
12 years of experience
Volvo XC90 L6-2.9L Turbo - Car starts and then dies - Indianapolis, Indiana
An asset to the company.

Irven

11 years of experience
60 reviews
Irven
11 years of experience
Volvo S40 L4-1.9L Turbo - Car starts and then dies - Baltimore, Maryland
Although he was on time and was able to try to diagnose the problem with my car,was not able to give a definitive diagnosis.

Excellent Rating

(5)

Rating Summary
4
0
1
0
0
4
0
1
0
0
Number of Volvo Car starts and then dies Inspection services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Can the Light Bulb Wiring Become Damaged?
Your Your car is as much electrical as it is mechanical. Wiring harnesses snake their way around the engine bay, and throughout the cabin of the vehicle. Most of your accessories run on electricity, and even the engine needs a...
What Is the Difference Between a Clean Title and a Salvage Title?
When When you purchase a vehicle, you're supposed to receive a title showing transfer of ownership. Several types of titles exist, and you need to understand the difference between a clean title and salvage title before you buy a used...
How to Replace a Cold Start Injector
The cold start valve fails when there is leakage coming from the fuel line. The cold start injector may have failed if the vehicle does not start.

Engine shakes when fuel is added

Hello! If the rubber bushings and motor mounts (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last) are really bad then it could cause a knocking noise. There should also be transmission mounts as well. I suggest to check out the motor mounts and transmission mounts for wear...

Thrumming and vibration under feet when driving

Hi, thanks for writing in. The noise and vibration you sense could be engine vibration passing direction directly into the body of the car. This normally should not occur, but it can happen when engine mounts or a transmission mount...

How much to do a tune up on a 2008 Scion I just bought and I am moving to Kansas in the next to days?

Hi there. Tune-up is an outdated phrase that has no true meaning for today's vehicles. Today's vehicles have maintenance schedules that list what needs to be performed at time and mileage intervals. There are many resources available online that may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com