Toyota Tercel Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(44)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(44)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Toyota Tercel Power Steering Pressure Hose Replacement is $253 with $85 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$731.54Shop/Dealer Price$865.22 - $1254.90
1995 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$976.59Shop/Dealer Price$1172.20 - $1753.28
1996 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$976.59Shop/Dealer Price$1172.24 - $1753.34
1992 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$579.25Shop/Dealer Price$675.56 - $958.66
1991 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$579.25Shop/Dealer Price$677.62 - $962.27
1990 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$426.05Shop/Dealer Price$484.26 - $652.60
1997 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$718.93Shop/Dealer Price$850.18 - $1238.06
1993 Toyota TercelL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$579.25Shop/Dealer Price$675.56 - $958.66
Show example Toyota Tercel Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(44)

Rating Summary
42
1
1
0
0
42
1
1
0
0

Andrian

30 years of experience
184 reviews
Andrian
30 years of experience
Tercel 1996 - Battery Light is on - Fort Lauderdale, FL
Very professional and attention to detail tell you wats wrong with your vehicle and let u know wat u need need to get to get your vehicle running again

Alfred

0 years of experience
530 reviews
Alfred
0 years of experience
Tercel 1995 - Turn Signal Bulb - San Francisco, CA
Alfred was early for the appointment, a plus. He was courteous and efficient. The work was performed in about 30 minutes and Alfred went over everything he noted for possible future work and let me know my tires needed air. I am very happy with the service and would use Alfred again and/or recommended him to others.

Excellent Rating

(44)

Rating Summary
42
1
1
0
0
42
1
1
0
0
Number of Toyota Tercel services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Diagnose Your Brake Issues
Car brake problems can be caused by different things. You can fix your brakes after doing a visual inspection and some brake tests in a safe space.
How to Buy a Good Quality Mass Airflow Sensor
A A faulty mass airflow meter can cause myriad problems, such as rough acceleration and idling, stalling and hesitation. It may be difficult to diagnose since the failure of a number of parts may mirror these symptoms. The same symptoms...
10 Best GPS and Navigation Apps for Road Trips
Find your go-to road trip planner app or GPS device and start your next adventure.

Loud buzzing noise when turning

A loud buzzing noise while driving that changes during a left or right turn can point towards a faulty suspension component like a wheel bearing. The bearing will make most of its noise under load so when the load changes....

Won't start after being tampered with.

Unfortunately, there would be no way to verify what was tampered with without looking at the vehicle in person to see what symptoms the car is exhibiting, and then checking for noticeable changes that are related to those symptoms. It...

Car in limp mode, check engine light on

In this case you should have an experienced technician look at the vehicle. Limp mode is usually a term used for a vehicle with an automatic transmission which stays in second gear when certain faults arises. A certified technician, like...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com