Toyota Tacoma Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(857)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(857)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Toyota Tacoma Distributor Replacement is $496 with $356 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Toyota TacomaL4-2.7LService typeDistributor ReplacementEstimate$866.64Shop/Dealer Price$1048.15 - $1584.58
Show example Toyota Tacoma Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(857)

Rating Summary
803
33
4
5
12
803
33
4
5
12

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Toyota Tacoma V6-4.0L - Universal Joint (U-joint) - Chandler, Arizona
This was the 2nd time Scott helped me out. Always on time and professional. I will request him in the future and recommend him with no hesitation.

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Toyota Tacoma L4-2.7L - Starter - Orlando, Florida
Mr. Allen was very prompt to his appointment with me. He cleaned up after himself, explained what he was doing, installing a starter to the truck. He was polite and has a kind face. Love ya Mr. Allen.......................Maxine Whittaker RN.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Toyota Tacoma V6-3.4L - Car is not starting - Chandler, Arizona
Greg is a very honest guy that makes sure a service is done right. Very much recommend him.

Craig

15 years of experience
12 reviews
Craig
15 years of experience
Toyota Tacoma L4-2.7L - Car is not starting - McDonough, Georgia
Friendly, professional, competent, courteous, expert, knowledgeable, timely, and goes above and beyond. I don't know how describe much but that fit all about him.

Excellent Rating

(857)

Rating Summary
803
33
4
5
12
803
33
4
5
12
Number of Toyota Tacoma services completed
9427+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford Focus
The The 2012 Ford Focus brings a lot to the world of compact cars. Available as either a four-door sedan or a five-door hatchback, the Focus has great fuel efficiency and European styling that sets it apart from other cars...
4 Essential Things to Know Before Renting a Car
When When it comes to renting a vehicle, there are a number of questions that immediately arise – especially when the person behind the counter starts trying to get you to add a bunch of things to the bill. The...
How to Buy a Good Quality Child Car Seat
Today’s Today’s laws are stricter than ever before when it comes to child car seats. Parents need to be concerned about which way the seat is facing, how the seat is anchored in the car, what kind of harnessing system...

Recommendation about most reliable pickup trucks

Toyota (https://www.yourmechanic.com/scheduled-maintenance/toyota-tacoma/) is the most dependable. I remember seeing a '99 Tacoma with a 4-cylinder engine and standard transmission. It had 800,000 miles on it and it was still running pretty good. They make solid trucks. There is no arguing...

I was told some 4x4 jeep models are primarily front wheel drive then the rears kick in when engaged.

Hi there. To determine if your vehicle or another jeep in that manner is rear wheel drive or front wheel drive, simply look at the transmission. If the transmission is mounted horizontal, then the vehicle is front wheel drive. If...

My motorcycle pops a lot after I rev it a bit. And it wants to stall often when its running cold... sometimes while riding, cold or hot, there's a tendency for it to lag on acceleration. Could it be something otjer than a cran ratio issue? If it is a ration issue how could i know for SURE if its running lean or rich?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com