Suzuki XL-7 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(106)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(106)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Suzuki XL-7 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Suzuki XL-7V6-2.7LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2004 Suzuki XL-7V6-2.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Suzuki XL-7V6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Suzuki XL-7V6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2003 Suzuki XL-7V6-2.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2009 Suzuki XL-7V6-3.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Suzuki XL-7V6-2.7LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Suzuki XL-7V6-2.7LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Suzuki XL-7 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(106)

Rating Summary
100
4
0
0
2
100
4
0
0
2

Kiri

20 years of experience
372 reviews
Kiri
20 years of experience
Suzuki XL-7 V6-2.7L - Fuel Pump - Philadelphia, Pennsylvania
The Mechanic did wonderful work, but was running behind in schedule.

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Suzuki XL-7 V6-2.7L - Alternator - Kissimmee, Florida
great guy, great service

Phil

30 years of experience
48 reviews
Phil
30 years of experience
Suzuki XL-7 V6-3.6L - Spare Tire Installation - Silver Spring, Maryland
Great mechanic. On time and quick service. Will definitely use Phil again.

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Suzuki XL-7 V6-3.6L - Check Engine Light is on - Raleigh, North Carolina
Brandon was very professional, knowledgeable and thorough. Will use service in the future.

Excellent Rating

(106)

Rating Summary
100
4
0
0
2
100
4
0
0
2
Number of Suzuki XL-7 services completed
1166+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Child Seat Safety Laws in Iowa
In In the State of Iowa, motorists are required by law to ensure that children of certain ages are safely secured in moving vehicles. These laws are based in common sense, and are in place for the protection of your...
P0253 OBD-II Trouble Code: Injection Pump Fuel Metering Control "A" Low (Cam/Rotor/Injector)
P0253 means the fuel control actuator and the fuel metering sensor are not communicating well due to a faulty actuator, or a circuit issue.
P0894 OBD-II Trouble Code: Transmission Component Slipping
P0894 means there is an issue with the vehicle’s automatic transmission component due to low, empty, or dirty fluid, or faulty shift solenoids.

Check engine light

Hi there, thanks for your question. I'd be happy to help. A [misfire can be caused by a variety of things other than bad spark plugs such as bad plug wires, vacuum leak, dirty fuel injectors, a weak fuel pump...

fuel tank filler neck broken

The filler neck is readily available. For example, if you input your year, make and model and search on "fuel filler neck" at Car-Part.com (http://www.car-part.com) you will find an exact match for your truck with available vendors and prices. New...

My car has had some issues lately. Ive been watching a lot of youtube. Found 1 video of 5 ways to spot misfires. Im 5 for 5. But, somehow I don't think that is my only problem.. after watching multiple videos of guys working on misfiring [engines](/topics-engine-ford/), those cars sound and run great compared to mine lol. So this morning after driving to 2 different schools to pick up work for the kids, after the 2nd school stop, my car would not start. It would try, but then stall. I gave it gas, and as long as i was giving it gas, it sounded like my old dirt bike warming up, but would run until i took my foot off the gas. I got it home out of shear determination. It capped out at about 40 mph. It stalled at a stop sign. I came up on a red light and threw it in neutral which seemed to barely keep it alive. I changed the [spark plugs](/topics-spark-plug-ford/) not long ago but i haven't taken them out just yet to inspect. I have a little 1min video of part of my drive home. Im sick of bring it to a mechanic to spend 2k at a time just to still have issues

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com