Ram 1500 Classic Serpentine/Drive Belt Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
2019 Ram 1500 ClassicV6-3.6L	Service typeSerpentine/Drive Belt Replacement	Estimate$254.00	Shop/Dealer Price$282.35 - $359.30

Car

Service

Estimate

Shop/Dealer Price

2019 Ram 1500 ClassicV6-3.6L

Service typeSerpentine/Drive Belt Replacement

Estimate$254.00

Shop/Dealer Price$282.35 - $359.30

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

When to consider replacing the serpentine belt:

Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(4)

Rating Summary

SEE REVIEWS NEAR ME

Albin

7 years of experience

17 reviews

Request Albin

by Kim

Ram 1500 Classic V6-3.6L - Battery - Brooklyn, New York

Alvin was great. He replaced my car battery quickly and checked the rest of the car for me. Super nice and knowledgeable.

Elias

15 years of experience

225 reviews

Request Elias

by Anthony

Ram 1500 Classic V6-3.6L - Brake Rotor/Disc Replacement (Front, Rear) - Brooklyn, New York

One of the best mechanics I’ve ever seen he was so fast it was like He was flying ,guys if you want to deal with a Mechanic he is your guy I would pay extra just to have him show up

Luis

16 years of experience

244 reviews

Request Luis

by Alexis

Ram 1500 Classic V6-3.6L - Brake Rotor/Disc Replacement (Rear) - North Las Vegas, Nevada

Luis was very friendly and did an awesome job 酪

Rodney

37 years of experience

611 reviews

Request Rodney

by Trisha

Ram 1500 Classic V8-5.7L - Oil Change - Sacramento, California

Thank you for a quick and easy oil change!

Ram 1500 Classic Serpentine/Drive Belt Replacement at your home or office.

Estimate price near me

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ram 1500 Classic Serpentine/Drive Belt Replacement is $190 with $50 for parts and $140 for labor. Prices may vary depending on your location.

What is a serpentine belt and how does it work?

When to consider replacing the serpentine belt:

How do mechanics replace the serpentine belt?

Is it safe to drive with a serpentine belt problem?

When replacing the serpentine belt keep in mind:

Meet some of our expert Ram mechanics

Excellent Rating

Rating Summary

Albin

Elias

Luis

Rodney

Excellent Rating

Rating Summary

Recent articles & questions

Codes P0129 and P0175.

Replaced E38 computer on 2006 Pontiac g6. Should I try it out or does it need programming first?

2006 Volvo s60 2.5T and when accelerating it vibrates violently

How can we help?