Porsche 911 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(125)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(125)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Porsche 911 Car Thermostat Replacement is $429 with $289 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Porsche 911H6-3.6LService typeCar Thermostat ReplacementEstimate$840.50Shop/Dealer Price$1008.98 - $1486.05
1994 Porsche 911H6-3.6LService typeCar Thermostat ReplacementEstimate$763.15Shop/Dealer Price$922.02 - $1388.33
1991 Porsche 911H6-3.3L TurboService typeCar Thermostat ReplacementEstimate$863.23Shop/Dealer Price$1031.26 - $1519.67
1998 Porsche 911H6-3.6LService typeCar Thermostat ReplacementEstimate$821.55Shop/Dealer Price$982.34 - $1450.08
1992 Porsche 911H6-3.3L TurboService typeCar Thermostat ReplacementEstimate$863.23Shop/Dealer Price$1036.78 - $1529.33
1997 Porsche 911H6-3.6L TurboService typeCar Thermostat ReplacementEstimate$854.65Shop/Dealer Price$1024.21 - $1517.15
2006 Porsche 911H6-3.6LService typeCar Thermostat ReplacementEstimate$1024.37Shop/Dealer Price$1194.57 - $1676.70
2011 Porsche 911H6-3.6LService typeCar Thermostat ReplacementEstimate$1037.51Shop/Dealer Price$1210.89 - $1702.80
Show example Porsche 911 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(125)

Rating Summary
120
0
2
0
3
120
0
2
0
3

Daniel

12 years of experience
252 reviews
Daniel
12 years of experience
Porsche 911 H6-3.2L - Car Battery Replacement - Des Plaines, Illinois
On-time, very knowlegable. a pleasure to meet him. I would have him work on my vehicles anytime.

Daniel

23 years of experience
20 reviews
Daniel
23 years of experience
Porsche 911 H6-3.6L - Relay Rides Inspection - Glendale, California
Daniel showed up on time and was very thorough with the inspection. Friendly guy and very professional.

Carlos

16 years of experience
9 reviews
Carlos
16 years of experience
Porsche 911 H6-3.8L - Oil Change - Los Angeles, California
I have a 2006 Porsche 911. For an oil change for my car, Carlos was excellent. My only comment is that for something more substantive than an oil change I'd want someone with more Porsche experience.

Ira

13 years of experience
34 reviews
Ira
13 years of experience
Porsche 911 H6-3.2L - Ignition Coil - Alpharetta, Georgia
Ira was thorough and patient to take the time to diagnose our car. He took the time to explain the issue and solution to us.

Excellent Rating

(125)

Rating Summary
120
0
2
0
3
120
0
2
0
3
Number of Porsche 911 services completed
1375+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

P0674 OBD-II Trouble Code: Cylinder 4 Glow Plug Circuit
P0674 code means when the voltage from the glow plug circuit has a variance of 10 % over manufacturer specs due to a faulty plug, relay, or wiring.
The Traveler’s Guide to Driving in El Salvador
Over Over the past several years, the country of El Salvador has become a very popular location for tourists. There are a number of things to see and do in the country. You can visit Museo de Arte de El...
P0501 OBD-II Trouble Code: Vehicle Speed Sensor Range/Performance
P0501 code definition Vehicle Speed Sensor Range/Performance What the P0501 code means P0501 is an OBD-II generic code that the engine control...

Sometimes my key gets stuck in the ignition

You have one of two different problems. Your key is worn too much and will not engage the tumblers enough to unlock the ignition lock cylinder. If the key is not worn out then your ignition lock cylinder is binding...

My truck uses a lot of gas

Hey there. There are many versions of your vehicle, so the mileage varies between 17 to 20 (combined city/highway) depending on the version. See fueleconomy.gov (https://www.fueleconomy.gov) to determine what the rated mileage is for your version of the vehicle. The...

Hi there i have a 2004 ford taurus ses 24 valve dohc the car will run for about 30 minutes than it will shut off had the alternate

Hi Craig. Thanks for stopping by tonight. If your battery is draining quickly, it's likely one of two issues. Either you have some loose or faulty charging system connections (from the alternator to the battery) or you have a parasitic...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com