Mitsubishi Van Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Mitsubishi Van Camshaft Seal Replacement is $600 with $220 for parts and $380 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Mitsubishi VanL4-2.4LService typeCamshaft Seal ReplacementEstimate$906.90Shop/Dealer Price$1058.64 - $1423.85
1988 Mitsubishi VanL4-2.4LService typeCamshaft Seal ReplacementEstimate$826.90Shop/Dealer Price$978.71 - $1343.97
1987 Mitsubishi VanL4-2.4LService typeCamshaft Seal ReplacementEstimate$826.90Shop/Dealer Price$978.71 - $1343.96
1990 Mitsubishi VanL4-2.4LService typeCamshaft Seal ReplacementEstimate$820.30Shop/Dealer Price$970.37 - $1330.61
Show example Mitsubishi Van Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Derrick

11 years of experience
176 reviews
Derrick
11 years of experience
Mitsubishi Van L4-2.4L - Adjust Ignition Timing - Emeryville, California
What a cool service! Derrick kept in touch as he was on his way, was friendly and informative, and fixed the timing problem on my old, unusual car. The fee was reasonable, especially considering the mechanics come to your house.

David

36 years of experience
195 reviews
David
36 years of experience
Mitsubishi Lancer L4-2.0L - Camshaft Seal - Pasadena, California
Once again, David came through. Did the job well, explained the issue and did not try and up sell me (one thing mechanics seem to do all the time). He also finished BEFORE the estimated time of completion he originally stated. Well done!

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Mitsubishi Endeavor V6-3.8L - Camshaft Seal - Ponte Vedra Beach, Florida
Great job. Very pleased.

Keven

7 years of experience
132 reviews
Keven
7 years of experience
Mitsubishi Lancer L4-2.0L - Camshaft Seal Replacement - Bellevue, Washington
Smooth process! Keven knows his stuff, arrived on time, and is extremely easy going and fun to talk with. Finished the task faster than expected. A+

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mitsubishi Camshaft Seal Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Figure Out the Value of a Classic Car
Determining the value of a classic car will require a different process than determining the value of a typical car. This is because classic cars gain their value based on a different set of criteria. For example, while altering a...
Fiat Certified Pre-Owned (CPO) Car Program
If If you are in the market for a used Fiat vehicle, you may want to consider cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Fiat, for...
P0963 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit High
P9063 means there is an issue with the pressure control solenoid A control circuit due to low or dirty transmission fluid, faulty wiring or solenoid.

Car has sat for a month and won't start

It's not uncommon for your battery to be drained down if your car sits for a month without starting. Modern vehicles have a lot of technology which requires a lot of computers. Those computers have what is called keep alive...

Master Cylinder failure, for a second time. Why? 2011 Nissan Altima

Hi there - I believe your master cylinder failure is being misdiagnosed. I believe the problem is with the brake booster (https://www.yourmechanic.com/article/how-to-replace-a-power-brake-booster) - one of the control valves (vacuum?) to be specific. If this valve malfunctions, it could allow much...

Bmw 325xi 2004. There is no heat and the car overheats.

Hi there. For your vehicle to overheat and not have any heater heat in the cab, then the coolant could be low, the water pump could be not working, the radiator could be plugged up, or the thermostat could be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com