Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Mitsubishi Sigma Brake rotors are turning blue Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1990 Mitsubishi SigmaV6-3.0L | Service typeBrake rotors are turning blue Inspection | Estimate$114.99 | Shop/Dealer Price$124.99 - $132.49 |
| 1989 Mitsubishi SigmaV6-3.0L | Service typeBrake rotors are turning blue Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
In a disc brake system, your calipers, pads and rotors are vital components for operation and safe slowing and stopping. In normal circumstances, your rotors should be silvery or gray. However, under some conditions, they can turn blue. This is a sign that there’s something wrong with your brakes, and it’s highly advised that you take action as soon as possible.
Disc brakes are actually pretty easy to understand. Pressurized brake fluid is sent through the lines from the master cylinder. In the caliper, the fluid actuates a piston, which effectively closes the caliper. This pinches the brake rotor between the inner and outer brake pads.
The harder you press the brake pedal, the harder the caliper pinches/squeezes the rotor. In a car equipped with antilock brakes, the ABS system keeps them from locking up by pulsating the brakes dozens of time per second.
The squeezing action of the caliper and pads against the rotor creates friction and heat. Friction is a necessary component here–it’s what slows and stops your car. Heat is unavoidable, but excessive temperatures can actually cause damage. This is where bluing can occur. If one of your rotors has turned blue, it’s important to have the problem diagnosed, as it’s an indication that something’s wrong. Over time, it could even lead to cracking of the rotor and damage to the pads, as well as compromising your safety on the road.
Locked Caliper: One very common reason for rotors to turn blue is that the caliper is locked and the brake pads remain in almost constant contact with the metal. This might be slight enough that you don’t notice any drag during normal operation, but it will be enough to generate significant heat and wear.
Corroded Slide Pins: Your car’s calipers slide back and forth on metal pins. These pins need to be well lubricated, clean and free of debris. If they become corroded, the caliper will not slide in and out properly and can remain too close to the rotor rather than moving back to the start position.
Pinched/Deteriorating Brake Line: Your brakes work on hydraulic pressure. If there’s damage to one of the brake lines (a kink, or internal damage to the liner that limits the amount of fluid flowing in and out), it can cause your caliper to stay at least slightly engaged at all times. This generates heat and blues your rotor.
Driver Error: If you’re a “two-footed” driver or regularly ride your brakes because you do a lot of stop and go driving or live in an area with lots of hills, you could be the inadvertent cause of the problem. Constantly engaging your brakes causes the same buildup of heat as having a locked caliper, but you’ll notice bluing on two or four rotors, rather than just one.
A top-rated mobile mechanic will come to your home or office to inspect your brake system, including the caliper, rotor, lines, pads and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
The mechanic will need to inspect the entire system visually. A test drive may be necessary, as well as other diagnostic steps. The mechanic will determine if there is drag on the affected wheel/wheels from a locked caliper and then advise you on the next step in the repair process.
Having brake rotors that turn blue is more than just an anomaly. It can become an expensive problem, and it can also reduce your safety on the road. Extreme heat can cause your rotors to warp and even crack, and your brake pads will deteriorate rapidly, leaving you with less stopping power. If the problem affects both front brakes, you may also notice brake fade. One of our professional mechanics can diagnose and repair the problem for you.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Mitsubishi owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
