Mercedes-Benz A220 Car is taking longer than normal to stop Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,626)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,626)

Car is taking longer than normal to stop Inspection Service

How much does a Car is taking longer than normal to stop Inspection cost?

On average, the cost for a Mercedes-Benz A220 Car is taking longer than normal to stop Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz A220L4-2.0L TurboService typeCar is taking longer than normal to stop InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Mercedes-Benz A220L4-2.0L TurboService typeCar is taking longer than normal to stop InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Mercedes-Benz A220L4-2.0L TurboService typeCar is taking longer than normal to stop InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz A220 Car is taking longer than normal to stop Inspection prices

Most of us are so accustomed to how automotive brake systems work that we take them for granted. When you press the brake pedal, your car should slow down and stop. What’s more, it should do that in a normal amount of time. Of course, braking time varies on a number of factors, including vehicle weight, road conditions, speed and more, but drivers can usually estimate the amount of time needed for their car. If it seems to be taking longer than normal to stop, there may be a problem with the system.

How this system works:

Your brake system works on a relatively simple principle, although it requires a significant number of components in order to do its job. Fluid pressure and friction are the two primary factors here. Fluid pressure is created by the booster and master cylinder.

Pressurized brake fluid is then sent through your brake lines to the caliper, which squeezes the rotor between two brake pads – an inner pad and an outer pad. This creates friction. The material used in brake pad manufacturer is specially designed to withstand the high heat and pressure created.

However, pads and rotors do wear out over time. Additionally, significant heat can create problems like “brake fade”, which can result in longer stopping distances.

Common reasons for this to happen:

  • Worn Brake Pads: The most common cause of a car taking longer than normal to stop is simple brake wear. If it has been some time since your pads were changed and your rotors resurfaced, it might be a wise decision to have that service done now.

  • Brake Fade: Brake fade is noticeable in many situations, but the best example is driving down a curving mountain road that’s descending. You’re generally forced to keep your foot on the pedal and “ride” your brakes. This creates immense amounts of heat that affect the pads and rotors, resulting in reduced braking performance and longer stopping times. Brake fade is generally a temporary condition. When the pads and rotors cool, they should be back to almost normal.

  • Low Fluid Level: Your brakes work on hydraulic pressure. This means that fluid is required for them to operate. If the fluid is low, you’ll notice that it takes you longer to stop than normal. If the fluid level gets too low, the brakes won’t work at all.

  • Stuck Caliper: In order for your brakes to slow and stop your car normally, both front calipers need to be in good working condition. If your car takes longer than normal to stop, it could mean that one of the calipers is seized or not sliding on the slide pins correctly.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system, including the condition of the pads and rotors, the level of the fluid and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

Our mechanic will need to inspect the entire brake system, starting with the pads and rotors. The condition of the pads, rotors and calipers will be noted, and the mechanic will also inspect the master cylinder and the level of the brake fluid in the system.

How important is this service?

If your car is taking longer to stop than usual, it’s not a good sign. While it might be temporary brake fade due to high heat and riding your brakes, it may be a sign of a deeper problem. You should have your brakes regularly inspected during all basic maintenance (such as oil changes) and keep an eye on the condition of the system. If you’re experiencing any unusual brake performance, our professional mechanics can have the problem diagnosed and repaired in no time.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119

Collins

12 years of experience
512 reviews
Collins
12 years of experience
Mercedes-Benz A220 L4-2.0L Turbo - Oil Change - Atlanta, Georgia
Collins arrived before appointment time and was very professional. Collins also answered many questions I had about my vehicle. The service was exceptional and I will be using this platform for car repairs in the future.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Mercedes-Benz A220 L4-2.0L Turbo - Check Engine Light is on - Jacksonville, Florida
Knowledgeable, profession, and prompt. I love the service he provided...right in my own driveway!!

Jose

17 years of experience
154 reviews
Jose
17 years of experience
Mercedes-Benz CLK320 V6-3.2L - Oil Change - Henderson, Nevada
Nice job he did

Jay

37 years of experience
959 reviews
Jay
37 years of experience
Mercedes-Benz C240 V6-2.6L - Brakes, Steering and Suspension Inspection - Fontana, California
Very good at what he does.

Excellent Rating

(5,626)

Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119
Number of Mercedes-Benz services completed
61886+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2011 Dodge Dakota
2011 2011 marked the final year of production for Dodge’s venerable Dakota pickup truck. It was a compact pickup, not quite the size of the Ram, and competed with similar models like the Chevy S10 and the Ford Ranger (both...
How Long Does an Idle Control Valve Last?
Among Among the most important factors in having a smooth running car is a consistent idle speed. Having the incorrect idle speed can lead to a variety of different issues. There are a number of different components that have to...
How to Replace a Windshield Wiper Gearbox Assembly
Windshield wipers keep car windshields clear of rain and debris. The wiper gearbox transfers power from the wiper motor to the wiper arms.

Check Engine code p0758

A P0758 code indicates a problem with the vehicle's shift solenoid, specifically shift solenoid B. If this light has come on, then the vehicle may be experiencing poor performance, or unusual shifting. As this component is located on the underside...

Starter makes a 'clunk' noise

Hi there! It's likely that there is a ground connection compromised, loose, corroded, or power shortage. If the starter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-starter), battery (https://www.yourmechanic.com/article/how-to-check-a-car-battery), and the alternator (https://www.yourmechanic.com/article/how-to-test-your-alternator_2) are testing out to be fine then I suggest looking towards the connections and...

Hello Jim.. I am replacing an alternator in a Scion xb and have everything covered except I can find any info on the belt tensione

If you are planning to replace your alternator (https://www.yourmechanic.com/services/alternator-replacement) and need to release the tension on the belt for removal, I would recommend starting by removing the front right wheel. Then I would remove the splash guard behind the wheel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com