Kia Carnival Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4,017)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4,017)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Kia Carnival Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Kia CarnivalV6-3.5LService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Kia Carnival Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(4,017)

Rating Summary
3,824
101
22
10
60
3,824
101
22
10
60

Brandon

18 years of experience
275 reviews
Brandon
18 years of experience
Kia Sorento L4-2.4L - Valve Cover Gasket Replacement - Dacula, Georgia
He was very helpful.

Henry

34 years of experience
175 reviews
Henry
34 years of experience
Kia Soul L4-2.0L - Valve Cover Gasket - Mantua, New Jersey
Henry was on time and did a wonderful job. Explained what he did and why. Showed me some things I should keep an eye out for. He was clean and did work efficently.

David

10 years of experience
172 reviews
David
10 years of experience
Kia Sorento V6-3.5L - Pre-purchase Car Inspection - Orlando, Florida
Great job and trustworthy! Did an amazing preinspection!

Anthony

11 years of experience
103 reviews
Anthony
11 years of experience
Kia Optima L4-2.4L - Brake Caliper Replacement (Driver Side Front) - Keller, Texas
Dedicated, Professional, and very willing to work with his customers. Will always request Anthony for my future repairs

Excellent Rating

(4,017)

Rating Summary
3,824
101
22
10
60
3,824
101
22
10
60
Number of Kia services completed
44187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Mercedes-Benz GL350 BlueTec
If If you love a diesel engine in your SUV, but still want to ride around in luxury, your perfect vehicle may very well be the 2012 Mercedes-Benz GL350 BlueTec. Key Features The most important feature worth noting is the...
How Long Does a Vacuum Pump Last?
Your Your car’s engine is a very complex piece of machinery. In order for it to function properly, there are a number of different components that will have to work together. Among the most important aspects of an engine is...
How to Replace an Ignition Ignitor
The ignition ignitor sends a signal to supply power and start the engine. A common sign of failure is a disruption in the engine's starting process.

Bleeder valve not sealing

Try and remove the bleeder completely and cleaning the seat and bleeder and see if it works. If this does not work then replace the bleeder. It would've been helpful to know which bleeder screw you are referring to, as...

Check Engine Light is on and I've noticed one minute my gas says a half a tank and the next it's at a quarter

Hello. This is most likely a faulty fuel sending unit (https://www.yourmechanic.com/services/fuel-gauge-sender-replacement). This is a unit that sits in the fuel tank that sends a signal relaying how much fuel is in the tank. These commonly go bad on many cars....

My Chevy Malibu 2013 while driving and I came to a complete stop in the car started to shake really bad and then shut off and then

Sudden loss of engine power, and then a non-functioning starter, raises the possibility of no oil in the engine. In particular, if the engine was seized, the starter would not work in any attempt to re-start the engine. But there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com