Jeep Compass Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Jeep Compass Throttle Body Replacement is $420 with $280 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$826.96Shop/Dealer Price$998.55 - $1505.22
2007 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$833.43Shop/Dealer Price$1007.12 - $1524.08
2009 Jeep CompassL4-2.0LService typeThrottle Body ReplacementEstimate$816.07Shop/Dealer Price$985.45 - $1489.40
2013 Jeep CompassL4-2.0LService typeThrottle Body ReplacementEstimate$816.07Shop/Dealer Price$985.45 - $1489.40
2018 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$727.29Shop/Dealer Price$875.95 - $1314.42
2009 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$833.43Shop/Dealer Price$1007.29 - $1524.37
2014 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$834.97Shop/Dealer Price$1009.09 - $1527.23
2012 Jeep CompassL4-2.4LService typeThrottle Body ReplacementEstimate$833.43Shop/Dealer Price$1007.15 - $1524.12
Show example Jeep Compass Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Colby

13 years of experience
34 reviews
Colby
13 years of experience
Compass 2016 - Throttle Body - Denver, CO
Colby has been extremely helpful and even came over on what would have been his normal day off to make sure my vehicle was fixed.

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Compass 2016 - Throttle Body - Redmond, WA
Highly professional, knowledgeable, and friendly. Definitely recommend.

Salvador

19 years of experience
14 reviews
Salvador
19 years of experience
Compass 2010 - Not able to change gears - Germantown, MD
Very knowledgeable and helpful. Will use him again if possible.

Deuwn

0 years of experience
33 reviews
Deuwn
0 years of experience
Compass 2012 - Oil Change - Washington, DC
OMG! What professionalism. Deuwn arrived a few minutes ahead of his scheduled time. He was dressed for success. He was very cordial and went right to work. He expertly and expeditiously completed my oil change in no time. I highly recommend Deuwn for your car-care needs.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Jeep Compass Throttle Body Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Montana Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Montana. Speed limits in Montana Montana has one of the highest interstate speed limits in the country. As...
Why Is it Important to Be Able to Pass an Emissions Test?
Emissions Emissions testing is done for one simple reason – to reduce the amount of pollution created by automobiles on the road today. Most states have at least some counties where testing is mandatory, but it’s more common in areas...
How to Replace a Radiator Drain Cock
The radiator drain plug goes bad when the oil pressure is lower than normal, there is leaking coolant, or the Check Engine Light is on.

How do you install a front license plate?

If you live in a state that requires license plates on the front and rear, or if you want to install a vanity plate on the front of your car, you’ll just need to follow these simple steps: Locate the...

Car not starting after putting gas in

The most likely cause of the hard start (https://www.yourmechanic.com/services/car-is-hard-to-start-inspection) after getting fuel is going to be a leaking fuel vapor purge valve. The leaking purge valve would allow the fumes that build up in the fuel tank while refueling to...

VVT VS VCT

Mike, you are very welcome! Keep in mind there are several components to these systems, and the issue may not be the solenoid alone. Despite the cause of the noise, the technician will be there to find it and help...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com