GMC G1500 Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a GMC G1500 Fuel Injector Replacement is $943 with $803 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1993 GMC G1500V8-5.7L	Service typeFuel Injector Replacement	Estimate$1996.24	Shop/Dealer Price$2460.15 - $3843.78
1993 GMC G1500V6-4.3L	Service typeFuel Injector Replacement	Estimate$1751.31	Shop/Dealer Price$2154.47 - $3359.84
1990 GMC G1500V8-5.0L	Service typeFuel Injector Replacement	Estimate$2384.83	Shop/Dealer Price$2946.40 - $4626.92
1993 GMC G1500V8-5.0L	Service typeFuel Injector Replacement	Estimate$2384.83	Shop/Dealer Price$2946.40 - $4626.92
1994 GMC G1500V8-5.0L	Service typeFuel Injector Replacement	Estimate$2384.83	Shop/Dealer Price$2947.87 - $4629.50
1992 GMC G1500V8-5.0L	Service typeFuel Injector Replacement	Estimate$2384.83	Shop/Dealer Price$2946.54 - $4627.17
1992 GMC G1500V8-5.7L	Service typeFuel Injector Replacement	Estimate$1987.23	Shop/Dealer Price$2449.41 - $3831.75
1991 GMC G1500V8-5.0L	Service typeFuel Injector Replacement	Estimate$2384.83	Shop/Dealer Price$2946.40 - $4626.92

Show example GMC G1500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Zachary

10 years of experience

43 reviews

Request Zachary

Zachary

10 years of experience

Request Zachary

by Jon

GMC Yukon V8-5.7L - Fuel Injector - Hockley, Texas

Nice guy, friendly and courteous. He did good work. While it did not fix the overall issue with the car, what he was tasked to do was done well and knocks off a possible cause of my misfire. Thanks Zachary!

Jose

18 years of experience

433 reviews

Jose

18 years of experience

by John

GMC C2500 V8-5.7L - Fuel Injector Replacement - Portland, Oregon

Paul

34 years of experience

134 reviews

Paul

34 years of experience

by Robert

GMC C2500 V8-5.7L - Fuel Injector - Middlesex, North Carolina

Once again professional service

Robert

32 years of experience

646 reviews

Robert

32 years of experience

by Vitantonio

GMC K1500 Suburban V8-5.7L - Fuel Injector - San Jose, California

I cannot begin to describe how great of a mechanic Robert is not only did he constantly keep me updated , was very straightforward , extremely professional and did absolutely excellent work we'll probably never use another mechanic other than him ever again I would recommend him to absolutely anybody

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

P0144 OBD-II Trouble Code: O2 Sensor Circuit High Voltage (Bank 1, Sensor 3)

P0144 P0144 code definition O2 Sensor Circuit High Voltage (Bank 1 Sensor 3) What the P0144 code means P0144 is the OBD-II generic code which indicates that the Engine Control Module (ECM) has detected excessively high voltage from the bank...

C1104 OBD-II Trouble Code: Traction Control Active Lamp - Circuit Short to Battery

Trouble code C1104 means the Engine Control Unit (ECU) has registered a short circuit issue in the traction control lamp.

A Buyer’s Guide to the 2012 Honda Insight

The The 2012 Honda Insight is a dedicated hybrid five-door hatchback. Designed for those who want an environmentally conscious vehicle that also saves considerably at the pump, this hybrid also features a lower price tag, even for a fully equipped...

How does the antilock brake system work?

The anti-lock brake system (ABS) on your car is designed to help ensure that you’re able to maintain control of the steering when you slam on your brakes. It’s a hydraulic system and supplemental to your main brake system. The...

I have an exhaust leak

The exhaust manifolds are known to warp on these engines, causing an exhaust leak. This is typically most noticeable when the engine is cold, before the metal heats up and expands. The only solution is to replace the manifold(s). However,...

Loss of power and jerking when accelerating

Hello and thank you for contacting YourMechanic. This sounds like the turbo shift broke and the turbo quit working. To test the turbo, put the vehicle in an open area and set the parking brake. Step on the service brake...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com