GMC Envoy XUV Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(20)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(20)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a GMC Envoy XUV Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 GMC Envoy XUVL6-4.2LService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
2004 GMC Envoy XUVV8-5.3LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2004 GMC Envoy XUVL6-4.2LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2005 GMC Envoy XUVV8-5.3LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.69 - $264.00
Show example GMC Envoy XUV Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
GMC Envoy XUV L6-4.2L - Brake Pads Replacement (Rear) - York, South Carolina
job well done

Lucas

10 years of experience
33 reviews
Lucas
10 years of experience
GMC Envoy XUV L6-4.2L - Exhaust Manifold - Frederick, Maryland
Lucas was professional and knowledgeable. He went about his business and did a good job.

Yahshif

10 years of experience
128 reviews
Yahshif
10 years of experience
GMC Envoy XUV L6-4.2L - Pre-purchase Car Inspection - Long Beach, California
Yashif was extremely knowledgeable and professional. Tremendous personal knowledge in 4wd, transfer cases, engines and vehicle manufacture design. Highly highly recommended. Very passionate about mechanics. Expert pre-purchase inspection.

Carlos

17 years of experience
225 reviews
Carlos
17 years of experience
GMC Envoy XUV L6-4.2L - Alternator - Sun Valley, California
He did a good job in a timely manner.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0
Number of GMC Envoy XUV services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Intake Manifold Runner Control
Common signs include difficulty starting the engine, the Check Engine Light coming on, engine misfires, and a decrease in power and acceleration.
How to Drop a Gas Tank
The The fuel tank on your car is typically located under the rear or middle of the vehicle. There can be a number of reasons why you would need to remove it; the most common reason is needing to replace...
What Does the Coolant Temperature Warning Light Mean?
The coolant temperature warning light turns on when your engine is sensed to be too hot and is at risk of damage from overheating.

My car has low oil pressure. I've already changed the oil pressure sensor 3 times.

If you have replaced the sensor three times and it did not fix the problem, then you may have problems with the oil pressure being low at idle due to wear in the engine bearings. The reason it would be...

06 ford freestylye is slow and has high rpm what is that

Hi there. There are several things that could be going on with your Ford Freestyle. If the transmission fluid is low, you might have this problem; but it's also possible that your vehicle is locked in what's called a "limp...

Second Opinion] I have a 2018 Corolla. The driver side wiper has not worked well since I bought the car. I’m on my third set of wiper blades. The passenger side wiper works perfectly. The driver side wiper chatters like crazy.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com