Chevrolet Metro Exhaust Gas Recirculation (EGR) Tube Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Exhaust Gas Recirculation (EGR) Tube Replacement Service

How much does a Exhaust Gas Recirculation (EGR) Tube Replacement cost?

On average, the cost for a Chevrolet Metro Exhaust Gas Recirculation (EGR) Tube Replacement is $243 with $148 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chevrolet MetroL3-1.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$410.59Shop/Dealer Price$494.49 - $723.69
2001 Chevrolet MetroL4-1.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$390.59Shop/Dealer Price$474.51 - $703.72
2000 Chevrolet MetroL4-1.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$390.59Shop/Dealer Price$474.51 - $703.72
1999 Chevrolet MetroL4-1.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$390.59Shop/Dealer Price$474.49 - $703.68
1999 Chevrolet MetroL3-1.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$390.59Shop/Dealer Price$474.52 - $703.75
1998 Chevrolet MetroL3-1.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$390.59Shop/Dealer Price$474.51 - $703.72
1998 Chevrolet MetroL4-1.3LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$395.59Shop/Dealer Price$479.37 - $708.48
Show example Chevrolet Metro Exhaust Gas Recirculation (EGR) Tube Replacement prices

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.

Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse gas mileage and possibly fail emissions standards.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Raul

34 years of experience
285 reviews
Raul
34 years of experience
Chevrolet Metro L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Oakland, California
I'm am very happy with the service I received from Raul. He was there early and did the job well and didn't take long. He was thorough and also inspected my car after he was done.

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Chevrolet Metro L4-1.3L - Tune up inspection - North Las Vegas, Nevada
A REAL mechanic, very nice, very helpful, very honest TY Milton :)

Stephen

12 years of experience
36 reviews
Stephen
12 years of experience
Chevrolet Metro L4-1.3L - Headlight Bulb Replacement (Driver Side Low Beam, Driver Side High Beam) - San Diego, California
Very nice, capable and had the job completed quickly and efficiently.

Richard

13 years of experience
601 reviews
Richard
13 years of experience
Chevrolet Metro L4-1.3L - Clutch Cable - North Las Vegas, Nevada
Richard is very nice and knows what he is doing! He proved too me that I have a GREAT car even for it's miles! Thanx Richard

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Chevrolet Metro services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

What Are the Dangers of Lowering My Car?
It It has become fairly common for car owners to modify their cars’ suspensions to make their car ride lower. Usually aesthetics are one of the most important reasons for reducing ride height — many people prefer the appearance of...
How to Remove a Car Battery
An auto battery helps power car electrical systems. To remove a car battery, you will need work gloves, safety goggles, and basic hand tools.
P0260 OBD-II Trouble Code: Injection Pump Fuel Metering Control “B” Intermittent (Cam/Rotor/Injector)
P0260 P0260 code definition Injection Pump Fuel Metering Control “B” Intermittent (Cam/Rotor/Injector) What the P0260 code means P0260 is an OBD-II generic code that the injection pump fuel metering control valve circuit has intermittent current flow when the engine control...

How do I charge the battery?

While the battery in your car is designed to last for a long time, there are instances where it might discharge without actually needing to be replaced. For instance, if you don’t drive the car for a long time, the...

Does my car have a cold start valve or cold start injector?

Hello There, If your car is E85 equipped, meaning the engine is capable of running on a higher ethanol content fuel (usually indicated by the yellow fuel pumps at the gas station and gas caps), this may cause a lot...

Murano 2004 step motor P1778 rpm transmutation failures

The reason you cannot get the step motor is due to it is an internal transmission component and this transmission is a CVT transmission and not rebuildable and must be replaced since no repair parts are available.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com