BMW X6 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(55)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(55)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a BMW X6 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW X6V8-4.4L TurboService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2011 BMW X6V8-4.4L Turbo HybridService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2008 BMW X6L6-3.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2019 BMW X6V8-4.4L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2010 BMW X6V8-4.4L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2015 BMW X6L6-3.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2017 BMW X6L6-3.0L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 BMW X6V8-4.4L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example BMW X6 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(55)

Rating Summary
52
2
0
0
1
52
2
0
0
1

Amor

43 years of experience
181 reviews
Amor
43 years of experience
BMW X6 L6-3.0L Turbo - Oil Change - Livermore, California
Pleasure to work with!

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
BMW X6 L6-3.0L Turbo - Stabilizer Bar Links Replacement (Front) - Chicago, Illinois
Very knowledgeable & honest about my vehicle! Fixed what needed to be fixed & my car is running 100% better.

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
BMW X6 L6-3.0L Turbo - Oil Change - Los Angeles, California
good service

Jason

17 years of experience
429 reviews
Jason
17 years of experience
BMW X6 L6-3.0L Turbo - Brake System Flush - Livermore, California

Excellent Rating

(55)

Rating Summary
52
2
0
0
1
52
2
0
0
1
Number of BMW X6 services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Wiper Gearbox Last?
Having Having fully functional wipers is an essential part of getting around on the roadways safely. The wipers on a car can only work if a variety of different parts work together. The wiper gearbox is what helps to provide...
P0114 OBD-II Trouble Code: IAT Sensor Circuit Intermittent Input Problem
P0114 P0114 code definition Intake Air Temperature (IAT) sensor circuit intermittent input problem What the P0114 code means P0114 is the OBD-II generic code that the engine control module (ECM) has recorded the IAT sensor input intermittently. What causes the...
P2327 OBD-II Trouble Code: Ignition Coil J Primary Control Circuit Low
P2327 P2327 code definition Ignition Coil J Primary Control Circuit Low What the P2327 code means This trouble code indicates that the powertrain control module has detected a malfunction within the ignition coil circuit that is associated with it. What...

Ac doesn't work after radiator replacement

If it flat out does not function at all, it is possible an electrical connector was not re-attached. But there are actually quite a few possibilities, such as the condenser fan (https://www.yourmechanic.com/services/ac-condenser-fan-replacement) not being re-attached, not working, or damaged; the...

dont know if my tranny is shifting into overdrive and the torch converter not locking in or the orther way around

Gear selection, and coincident operating parameters (e.g., line pressure; solenoid position), on your transmission are easiest to see with a manufacturer scan tool. If and once it is determined that there is no lock-up, or no overdrive gear, the cause...

My 2013 dodge avenger will not shift from drive to park or reverse, the shifter moves but doesnt change. also now my trunk will not open with remote or button and car will not start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com