BMW 750i Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a BMW 750i Power Steering Pump Replacement is $889 with $511 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 BMW 750iV8-4.4L Turbo HybridService typePower Steering Pump ReplacementEstimate$2028.70Shop/Dealer Price$2324.95 - $3121.56
2014 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$3502.34Shop/Dealer Price$4121.61 - $5923.80
2016 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$2373.96Shop/Dealer Price$2711.48 - $3667.65
2010 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$2145.32Shop/Dealer Price$2425.65 - $3210.33
2015 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$3502.34Shop/Dealer Price$4141.79 - $5959.12
2009 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$2145.32Shop/Dealer Price$2427.55 - $3213.65
2012 BMW 750iV8-4.4L TurboService typePower Steering Pump ReplacementEstimate$2145.32Shop/Dealer Price$2425.87 - $3210.70
2012 BMW 750iV8-4.4L Turbo HybridService typePower Steering Pump ReplacementEstimate$2145.32Shop/Dealer Price$2425.65 - $3210.33
Show example BMW 750i Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(50)

Rating Summary
45
3
1
0
1
45
3
1
0
1

Michael

7 years of experience
142 reviews
Michael
7 years of experience
BMW 750i V8-4.8L - Transmission Fluid Service - Lakewood, Washington
Very Satisfied

Kevin

26 years of experience
19 reviews
Kevin
26 years of experience
BMW 750i V8-4.4L Turbo - Tire Rotation - Lake Worth, Florida
Great mechanic and even better person! Would recommend to anyone!

Johnny

34 years of experience
392 reviews
Johnny
34 years of experience
BMW 750i V8-4.8L - Pre-purchase Car Inspection - Sacramento, California
Great guy

Chandler

12 years of experience
15 reviews
Chandler
12 years of experience
BMW 750i V8-4.8L - Brake System Flush - Boynton Beach, Florida

Excellent Rating

(50)

Rating Summary
45
3
1
0
1
45
3
1
0
1
Number of BMW 750i services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

The 5 Safest Used Cars You Can Buy For Under $20,000
The Subaru Legacy, Honda Accord, Ford Fusion, Chevy Volt, and the Volvo XC60 are five of the overall safest used cars you can buy for under $20,000.
Why There's a Decline in Driver’s Licenses in the US
Where Where we live and how we get around is changing, and millennials are leading the way. Millennials, those between ages 18 to 34 (also known as Gen Y), now outsize the baby boomer generation. With 80 million millennials in...
A Buyer’s Guide to the 2012 Audi A5
For For drivers who want a comfortable ride, expert handling and luxurious amenities, the 2012 Audi A5 will certainly fit the bill. Designed for performance and to deliver a gorgeous look, this model offers an array of options and features...

My windshield wipers only have one speed

Wiper speed not changing with settings can be caused by a couple of different things. The wiper switch may have broken mechanical contacts or broken electrical circuits internally. Also, the wiper motor may have electrical issues. AN internal resistor may...

My 04 kia sedona stalls out when i stop or brake, it cranks but wont turn over. I replaced the main relay fuse but still no go

Hello, thank you for writing in. The possible issues with the vehicle are rather extensive without some more information. The first step is to have the vehicle scanned for diagnostic codes, so we know what the vehicle's computer has detected...

Car is idling at low speed my check engine light came on

Hi Johnny. There are several components that can cause a low engine idle, and trigger the check engine light from idle control valves, throttle body itself, fuel injectors, mass air flow sensor and more. The light itself is activated when...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com