Audi A4 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(424)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(424)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Audi A4 Wheel Bearings Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Audi A4L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$532.02Shop/Dealer Price$622.84 - $876.87
1998 Audi A4L4-1.8L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$219.01Shop/Dealer Price$230.48 - $255.53
2007 Audi A4L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$520.31Shop/Dealer Price$607.17 - $858.23
2009 Audi A4L4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$505.71Shop/Dealer Price$592.24 - $843.05
1998 Audi A4V6-2.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$219.01Shop/Dealer Price$233.89 - $261.49
2009 Audi A4L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$505.71Shop/Dealer Price$592.53 - $843.57
1997 Audi A4L4-1.8L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$219.01Shop/Dealer Price$230.57 - $255.69
2008 Audi A4L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$520.31Shop/Dealer Price$607.16 - $858.22
Show example Audi A4 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(424)

Rating Summary
390
15
2
2
15
390
15
2
2
15

Justin

9 years of experience
372 reviews
Justin
9 years of experience
Audi A4 L4-2.0L Turbo - Oil Change - Pompano Beach, Florida
This is a so convenient and the price is excellent for maintenance services. Justin was professional and knowledgeable and had all the work I requested (oil change and tire rotation) done is less than two hours. I won't hesitate to call Justin for my next scheduled maintenance.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Audi A4 L4-2.0L Turbo - Spark Plugs - Bothell, Washington
So punctual and so efficient. I would use his services definitely another time, if and when needed.

John

20 years of experience
86 reviews
John
20 years of experience
Audi A4 L4-2.0L Turbo - Oil Change - Memphis, Tennessee
Very knowledgeable and pleasant

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Audi A4 L4-1.8L Turbo - Car is not starting - Scottsdale, Arizona
Peter was very timely, efficient, and knowledgeable.

Excellent Rating

(424)

Rating Summary
390
15
2
2
15
390
15
2
2
15
Number of Audi A4 services completed
4664+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Check Belts in Your Car
Engine drive belts are a crucial part of how your car functions. Knowing how to identify any issues with them can help prevent a breakdown.
How to Replace Rear Car Brake Shoes
Car brakes consist of disc brakes or drum brakes. Brake shoes are a part of drum brakes and provide the full braking power needed to stop a car.
P2068 OBD-II Trouble Code: Fuel Level Sensor “B” Circuit High
P2068 P2068 trouble code definition Fuel Level Sensor “B” Circuit High What the P2068 code means This code indicates the fuel level sensor is indicating a higher than expected voltage. The higher the value the more fuel is in the...

Power steering return hose leaks.

Check the clamps and make sure they are tight. If not, the line may have to be replaced. A Fluid leak like this can come from several different places. The hose can experience high pressure, especially where they meet with...

I DROVE THRU A FLOOD & MY CAR STALLED. NOW THAT IT STARTS ITS KNOCKING... WHAT CAN BE CAUSING THIS?

If you drove through deep water, chances are your engine took in some water and did internal damage to it. When engine suck in water, they cannot compress the water that gets into the cylinder, so it usually locks up...

I have a 2011 Volkswagen CC it starts but it turns over really slow

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com