Q: Valve guide seals 2006 BMW 750i
I was trying to get a quote on my valve guide seals but did no see the option do yall service this issue?
My car has 157000 miles.
My car has an automatic transmission.
Hello - unfortunately, this is not a service YourMechanic.com can offer at this time. Thanks for thinking of us though!
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Unknown oil leak in a 2003 Chrysler PT Cruiser
Engine oil leaks will generally get worse over time so identifying the source of the leak and repairing the leak should be carried out as soon as possible. These engine are known to develop leaks at the front engine seal...
Low RPM/ Won't Shift
Hello and thank you for contacting YourMechanic. It seems like the IAC (idle air control) valve is malfunctioning. Check the wiring to the IAC for any debris and any corrosion. If the wiring harness is in good shape, then I...
Coolant is not being pulled from the reservoir.
Hello. From what you describe, it appears that your vehicle may be leaking coolant or may perhaps have air in the cooling system. First off, I would carefully inspect the engine bay and undersides of the vehicle for any signs...
Vibration or humming felt while driving my Uplander.
Hi there. If there is a vibration or humming noise on the front end of your van and the wheel bearings were already replaced, then either the CV shaft inner bearing is worn or the transmission final drive is worn....
My 2008 Mercedes-Benz heater blows warm then cool air
The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...
Squeaking Driveshaft.
If you replaced the driveshaft joints and the shaft is still making noise when in drive then you may have binding joints. You may need to make sure the new joints are not binding from the installation. You can use...
Why is my upper radiator hose collapsing in the middle when I start my car?
The radiator cap is designed to hot a certain amount of pressure in the cooling system when it gets hot and pressure builds up. When the pressure goes above the caps psi rating then the pressure from expansion is released...
Just changed my o2 sensor and my engine is still jerking while idling, and jolting while driving, what now?
You may be having a vacuum leak or another problem that is causing the O2 sensor to measure a lean condition. This would account for the rough running engine at idle. Have engine checked for a vacuum leak or leaks...
Passing gear
You should have the computer scanned and transmission linkage checked to see if the system has codes stored for transmission and shift linkage is not damaged and adjusted properly.
Related articles
What Is the Purpose of Engine Gaskets?
Engine gaskets work as seals to maintain pressure, hold fluids, and prevent debris from entering the engine. Gaskets are vital for engine performance.
5 Essential Things to Know About Luxury Vehicles
There’s There’s something to be said about the looks and offerings of luxury vehicles, but appearances can always be deceiving. If you’re considering buying a luxury car, there are a few things you need to know before you make your...
Symptoms of a Bad or Failing Connector Hose Heater Control Valve
If your car's AC stops being able to blow warm air and you find coolant leaks, you may need to replace the connector hose heater control valve.
Browse other content
Maintenance
Cities