My car refused to accelerate


My car refused to accelerate Mechanic's Assistant: How old is the transmission? Have you checked the fuel filters? When am on motion it just seize to accelerate Mechanic's Assistant: What is the make/model/year of...

My car refused to accelerate Mechanic's Assistant: How old is the transmission? Have you checked the fuel filters? When am on motion it just seize to accelerate Mechanic's Assistant: What is the make/model/year of your car? Its a corolla 2010 it has 90,000 miles on it but if I park the car and I match the throttle it revs up Mechanic's Assistant: Are you fixing your Corolla yourself? What have you tried so far? A technician checked the throttle sensor it was well connected, he then checked if the brain box had dust on it but that still was not the problem Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? The technician connected the wiring in such a way that I can start the vehicle on D

Automotive Expert
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call I’m sorry that you’re having trouble with your vehicle. I will do my best to help you resolve them. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. Ok, when you say it does not accelerate, do you mean that the engine stays at idle rpms when trying to accelerate, or that the engine revs higher but vehicle does not respond and speed up?

It stays idleIt stays at idle rpmsI just have to wait for it to come to a stop then I turn it offWait for some minutes, then I start it againSometimes after I wait and put it on, it accelerates and other times it don’t respond at all
Automotive Expert
HI Ok, the electronic throttle body needs to be replaced to resolve this and the new one will need to have the idle volume learn procedure done with scan tool This is a fairly common failure on this year Corollas

OkayWhen a technician checked it, he did a connection that enables the car to start when the gear is placed at Drive and the problem don’t happen when that connection is made

Hello are you still here
Automotive Expert
HI I would have to know exactly what he did to the wiring in detail to be able to be of help on that.

Okay is the electronic throttle body same as the injector mouthI put them both online and they seem to display thesame picture
Automotive Expert
HI, Never heard it called an injector mouth. The electronic throttle body is bolted to the intake manifold and controls throttle response when you press the gas pedal

File attached (PTGSMSP)

Is this how it looks ?
Automotive Expert
HI yes, that is the throttle body

that’s what needs to be changed right
Automotive Expert
that is correct

If it’s cleaned can the problem be solved
Automotive Expert
HI about a 25% that will resolve it.

Okay thank you
Automotive Expert
you are welcome

Any other possible causes or that’s the only causeMy technician here was saying it was the brain box am sure he has no knowledge
Automotive Expert
HI It is extremely rare for it to be the computer

What others are asking

How Does a Hydraulic Clutch System Work?
A hydraulic clutch system works using various hydraulic components to actuate the clutch when the pedal is pushed in. The system works similar to how the brakes work on your vehicle. The clutch hydraulics consists of the clutch pedal, connecting...
Power steering hard to turn
It sounds like your power steering may be running low on fluid and may have a leak or possibly the power steering pump is going bad. I would recommend having a technician, such as one from YourMechanic, come out and...
Antitheft feature shut down
There are a few things you might attempt to see if the system recognizes the keys again and resets itself. You can try to lock and unlock the drivers door using the key. This will sometimes reset the system by...
My brake light stays on - 2004 Infiniti QX56
Hi there. Check the brake pedal brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) to see if the contacts are closed (meaning the switch is engaged) with the pedal all the way up. It is possible that the brake pedal has moved down a...
My truck will crank but won't start.
Hi there: Anytime you complete wholesale changes as you have on your Chevrolet C1500, it's more than likely that you'll experience electrical glitches which will cause the issues you're experiencing. It's possible that a ground wire or other electrical sensor...
Water leaking out from side of engine
The freeze plugs are on the side of the engine block and in other areas of the engine that will corrode and rust out over time and may start to leak. You will need to have the cooling system pressure...
P0449 vent solenoid valve low circuit
If you are getting codes to the vent solenoid and cannot command it open with the scanner then you need to see if scanner said it is open or closed. Then test the resistance of the solenoid for specified resistance....
When i put my Car in drive or reverse i lose power but in park or netural the voltage is normal
Hello there, many faults will cause your battery light to be on when your 2005 Ford Crown Victoria is in drive or reverse. You have done well in replacing parts so far, but the vehicle must be diagnosed fully before...
What causes Nissan Sentra 06 not to drive in D or Reverse but will in 1st and 2nd Gear .?
Hi there. Most transmission problems are due to either low fluid levels or dirty transmission fluid and debris inside the hydraulic lines, creating an obstruction and difficulty shifting gears. However, when you have an issue like you've described, it's more...