Q: Transmission gears
2000 Silverado makes grinding noise in reverse and won't move , moves forward sounds like gears binding also 4w message ! Help ?
My car has an automatic transmission.
You may have a broken transfer case and should have the system tested and see if the problem is in transfer case or the transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
no crank with new starter, starter relay, battery, alternater.
If you tried jumping the contacts on the starter directly, then your problem is most likely a power or ground issue. The battery ground cable may not be making a good connection at the engine ground, or there could be...
Key fob won't unlock or lock doors
I believe you should have a technician use a capable scan tool to test the immobilizer and security system of the vehicle. There are likely codes present that will lead you directly to the issue. Also have them test the...
Okay so basically my car shakes and vibrates a lot while idle or at a stop light. And then when I go above 65 rides rough
The rough idle may be caused by a variety of things, but this happens most commonly when the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or the idle air control (https://www.yourmechanic.com/services/idle-control-valve-replacement) module have failed. The mass air flow sensor is responsible for...
p0720 code will not stay gone
Hello. If the vehicle speed sensor has been replaced then the wiring to the sensor must be tested. If there is high resistance or any breaks in the wire then this will occur. I have also seen the signal gear...
ABS, ESP, EBR malfunction
You're getting into an area that is kind of a dark art when you're getting these kinds of codes. While I don't know any of the symptoms that the car is exhibiting, I can tell you that failure in one...
Changing tailight/brake light double filament bulb on 08 sienna. Bulb is stuck in socket. Bad. Can't pull it out. Any ideas?
If the bulbs are stuck in the sockets then the sockets most likely got overheated from the bulbs and deformed the socket. You will need to replace the sockets and the bulbs.
Why does my temperature gauge go into the red when using the heater in my 1992 Chevrolet Lumina
Hello. There area lot of things that can cause this. The first thing I would check is the thermostat. If the thermostat is not opening right then this will occur. If the thermostat is fine then it may have a...
Strut creaking when on an incline and turning steering wheel
Hello, thank you for writing in. Some noise is normal when struts are stressed out or pushed to limits. However excess noise is an issue, and it should be inspected. With the age of the vehicle taken into consideration, if...
Related articles
2012 Ford F-150 vs. 2012 Chevrolet Silverado: Which One Should I Buy?
When you’re ready to really get some work done, there’s nothing like a full size pickup truck. These trucks are ready to haul a big load and really get in there and get busy. SUVs are great for moving people,...
The Best Used Cars to Buy If You're an Undercover Cop
If If you're an undercover cop, when you choose a used vehicle, your main purpose is to look like anything but a cop. That means, of course, that an unmarked Crown Victoria is probably not the wisest choice. We’ve evaluated...
How to Get Chevrolet Dealership Certified
Chevrolet car dealerships offer automotive technician jobs to mechanics who are certified through the many training programs available.
Browse other content
Cities
Estimates
Services