I have trouble codes p0100 p0113 p0300
Responses
JOHN aka Eauto
279 days ago
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today.
sorry to hear your having issues with your nissan
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* and I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime.
is the po100 the ony code?
and so you mean po101?
Customer
279 days ago
I also have p0113 p0200 p0300
JOHN aka Eauto
279 days ago
is the maf and the iat plugged in?
Customer
279 days ago
What is an maf and iatMy micro mechanic is plugged in
JOHN aka Eauto
279 days ago
Phone call session started
JOHN aka Eauto
279 days ago
PO200 is not a valid code for your car Mass air flow sesnor and the intake air temp sesnor the 2 sensors between the air filter and the throttle body
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Problem with wandering steering
Assuming that the technician who checked your alignment also checked your suspension parts for play, it is possible that a tire conicity issue would be the cause of your problem. Although a tire may have correct pressure, it can still...
Mechanical problem with my car - 2010 Infiniti EX35
Hello there, many different faults could cause your Infiniti EX35 to run poorly. With the coolant gauge reading hot and the lack of coolant it sounds like your car overheated. When cars overheat the computer will put them into a...
My car isn't changing gears properly. 2006 Chevrolet Impala
Hello. I would check the transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) and condition on the dipstick. If it is low and/or has a burnt smell (transmission fluid should be a reddish color), then you may have a failed transmission. Changing the fluid...
P0302 (rear rotor misfire) and CEL not going away
Hey there. Your engine is misfiring but not until your engine is at high RPMs. The cause can be that you are not getting enough fuel or spark to the cylinder. You should have the engine cleaned of carbon, clean...
My transmission is sticking in 3rd gear.
Hello, thanks for writing in to YourMechanic. This behavior is a known problem with your Hyundai Elantra, and involves a transmission control solenoid that is malfunctioning. Check with your Hyundai dealer for Technical Service Bulletin (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-tsb-to-diagnose-and-repair-a-car-by-valerie-johnston) 286947. If you'd like...
Audi A4 makes noise In Sport Mode
Switching to sport mode only changes the transmission software. So I don't think you are actually experiencing a transmission problem. But the "sport mode" program enables the engine to reach higher speeds before shifting gears, so it could be that...
NYS Inspection
Generally a broken mirror would be considered a safety issue that you could fail for. Unfortunately with every state having different guidelines, we do not have access to each state's requirements. The best thing to do would be to just...
Car wont move when I step on the gas. I was driving when this happened
Hello, thank you for writing in. There are several reasons the gas pedal may become unresponsive. The first step is to have it scanned for diagnostic codes, to find out what issues the vehicle's computer has detected. This will narrow...
Method used to replace clutch fluid
There are two different methods that can be used. One is to use pressure on the master cylinder with fluid and push new fluid through the system. The other method is to use a vacuum at the clutch slave cylinder...
Browse other content
Maintenance
Estimates
I have trouble codes p0100 p0113 p0300 Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Yes have reset and now car runs ruff and have code p0100 Mechanic's Assistant: W...
I have trouble codes p0100 p0113 p0300 Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Yes have reset and now car runs ruff and have code p0100 Mechanic's Assistant: What is the make/model/year of your car? 2011 nissan juke sl awd Mechanic's Assistant: Are you fixing your Juke yourself? What have you tried so far? I had a mechanic check it but he did not repair anything Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I ran micro mechanic on it yesterday and got the codes p0300 p0200 and p0113