I just replaced an [brake](/topics-brake-nissan/) master ...
Customer
I just replaced an [brake](/topics-brake-nissan/) master cylinder and now the car wont start
Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded?
The battery is goo...
I just replaced an [brake](/topics-brake-nissan/) master cylinder and now the car wont start
Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded?
The battery is good the car comes on but doesnt turn over i took out the battery and the filter to get to the cylinder
Mechanic's Assistant: What is the make/model/year of your car?
2009 nissan rogue
Mechanic's Assistant: Are you fixing your Rogue yourself? What have you tried so far?
Yes i am fixing my self i also tookout the battery tray they is a silver wire that i dontknow what it attaches to
Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you?
Thats all
Read More
Responses
Clifton B.
215 days ago
Automotive Expert
hi my name is \*\*\*\*\* \*\*\*\*\* i will be helping you todays sorry you are having this problem with your car please give me a minute to review your questions
do the engine crank over at all ??
Customer
215 days ago
It makes noise but doesn't turn overIt was fine before I replaced the brake master cylinder
Clifton B.
215 days ago
Automotive Expert
is the service engine soon light on when trying to start
please check to make sur ethe mas air flow sensor is connected in the intake box
Customer
215 days ago
only lights on are tire pressurewhere is that located
Clifton B.
215 days ago
Automotive Expert
by the air filter
Customer
215 days ago
i cant call right nowIt's connectedThere is this silver wire with a ring on the end connected to the side of the carI don't know where the other end goes
Clifton B.
215 days ago
Automotive Expert
please send pix
Customer
215 days ago
Customer attachment 3/1/2021 8:13:36 PM
Customer
215 days ago
Customer attachment 3/1/2021 8:14:35 PM
Customer
215 days ago
Customer attachment 3/1/2021 8:16:03 PM
Customer
215 days ago
That first picture is what I was asking about
Clifton B.
215 days ago
Automotive Expert
dont worry about that wire is is just a ground pass did you check the sensor
Customer
215 days ago
That is connected
Customer
215 days ago
Customer attachment 3/1/2021 8:25:01 PM
Customer
215 days ago
Customer attachment 3/1/2021 8:27:32 PM
Customer
215 days ago
That also came spat yesterday but I paused is back together
Clifton B.
215 days ago
Automotive Expert
i am sorry i will have to opt out and see if someone else can better help you as i have to go off line
Customer
215 days ago
Ok
Clifton B.
215 days ago
Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* I would like to continue helping you with your no start problem.
Do you have access to a voltmeter or battery tester to verify the battery is fully charged?
Customer
215 days ago
No I don'tIt starts strong but won't turn overI am rechecking all connections now from parts that we're moved to get To the brake cylinder
Clifton B.
215 days ago
Automotive Expert
Do you mean you can hear the engine cranking but the vehicle does not start? Can you describe the noise you hear while turning the key.
Customer
215 days ago
No clicking sounds at allIt literally sounds like the engine is about to come on but it doesn't do that extra right at the end to get it startedShould I check the ignition switch in the fuse boxBut also before I replace the brake cylinder the car was working just fine so I thought it was something that I forgot to log back in or screw back in that was causing the car not to crankThe lights come on the radio works to air the fans turn on it's all his odds are in the car and sit I
Clifton B.
215 days ago
Automotive Expert
Does the engine sound like it is cranking slowly?
Clifton B.
215 days ago
Automotive Expert
It sounds like your battery voltage may be low. Do you have access to a battery charger?
Customer
215 days ago
I can take the battery to get charged
Clifton B.
215 days ago
Automotive Expert
That would be best to do before trying to diagnosis any other condition. After fully charging and reinstalling the battery you can reattempt to start the vehicle.
Clifton B.
215 days ago
Automotive Expert
Thanks again for using JustAnswer, and my name is\*\*\*\*\* I am going to mark our conversation as completed for now. After charging the battery if your car still does not start please let me know, and I can continue to assist you in getting everything figured out. -Joe
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
As far as I know, all vehicles meant to be used in the United States should have a double latch system. These systems have a primary latch which holds the hood down all the way and is released by the...
Hi. There are quite a few things that could be causing this issue. The control switch position is sent to the steering angle sensor via the clockspring in the steering column. Then the steering angle sensor sends the cruise control...
Many brake pads (https://www.yourmechanic.com/article/how-to-break-in-brake-pads) will make noise when installed. This is usually material noise that may or may not go away. One thing you could do that may help, is to lubricate the contact points on the brake pads. You'll...
Hello there, A few different things can cause insufficient EGR flow. The most likely are: a stuck closed EGR valve a failed EGR valve solenoid faulty oxygen sensor low fuel pressure exhaust leak These can also result in the reduced...
The axle could be the issue. However, the reason the axle is jumping in and out is more likely due to a worn bushing or control arm (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-control-arm-assembly). The control arms hold the tires to the ground. With your vehicle,...
You need to take it to a different mechanic to have a diagnosis. You either leaked out the refrigerant or the system was overcharged. Have the pressures checked. The sealer will not seal a leak in an evaporator or a...
If you are having issues with the transmission suddenly going to neutral instead of the next gear and also losing reverse or erratic gear engagement then you most likely have debri getting into the solenoid and valve body solenoids. You...
Hi there. Check the transmission fluid level and color. The fluid should be full when the engine is running at either cold or hot conditions. Plus the fluid should be red in color. If the fluid is dark red in...
Hi there. The code P0597 (https://www.autocodes.com/p0597.html) is for the thermostat heater control circuit. This means that the thermostat is electronically controlled in your vehicle. To see why this code is on, check the following: A loose or corroded connector on...
I just replaced an [brake](/topics-brake-nissan/) master cylinder and now the car wont start Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? The battery is goo...
I just replaced an [brake](/topics-brake-nissan/) master cylinder and now the car wont start Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? The battery is good the car comes on but doesnt turn over i took out the battery and the filter to get to the cylinder Mechanic's Assistant: What is the make/model/year of your car? 2009 nissan rogue Mechanic's Assistant: Are you fixing your Rogue yourself? What have you tried so far? Yes i am fixing my self i also tookout the battery tray they is a silver wire that i dontknow what it attaches to Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Thats all