I changed the transmission silonoids on my 08 altima now ...


I changed the transmission silonoids on my 08 altima now it wont move and goes into limp mode Mechanic's Assistant: When was your transmission fluid last checked? I just put new stuff in Mechanic's Assistant: Are ...

I changed the transmission silonoids on my 08 altima now it wont move and goes into limp mode Mechanic's Assistant: When was your transmission fluid last checked? I just put new stuff in Mechanic's Assistant: Are you fixing your Altima yourself? What have you tried so far? This is what happened my fluid pressure sensor went out so I couldn't find a pressure sensor so I just went to the auto wrecking place I got a whole new valve body it took a car out of limp mode and I could accelerate which I couldn't do before but it wouldn't shift properly so I took it back out and put the old seal noise off the valve body on the new one and now it won't move it all

Automotive Expert
Hello, My name is\*\*\*\*\* been working on cars since 1990, I have been a Just Answer expert since 2008. Thank you for contacting us for assistance with your vehicle. I will be happy to assist you. You will see an option to receive a phone call prompted by the website, you can agree to or decline. If you do not wish to use the Phone Service, we can continue chatting this way back and forth until you are satisfied with my help. Just keep in mind, it does take me time to respond. I am a Automotive Technician, I am not a fast typer.So lets get started.... Can I ask to whom I have the pleasure of speaking with today?

Jonmy i have a 08 altima that had a code on and said transmission fluid sensor so it put my car in limp mode and accelerated slow but it shifted fine...i decided to go to the wrecking yard and just change out the whole valve body
Automotive Expert
Hello John, Nice to meet you

Doing that it took it out of limp mode and took code away but it wouldnt shift right...so i pulled it out and put the old shift silonoids on it because they worked and now it wont moveHiNice to met u
Automotive Expert
I am sorry to hear about the problems you are having on your 08 Altima. I will do my best to help you with this.When you did the solenoid you removed the valve body correct? Also, what code do you have and where did you get the CVT fluid you used?There is a rod on the valve body that has to line up with the shifter linkage. If you do not line this up, when you put it in gear it won't move. Are you sure you have this lined up?

I removed the valve body and bought cvt fluid at walmart
Automotive Expert
https://gofile.me/5AB0c/7fjCPjMzZ

I did notice the valve body i put on there was alitle bit different though only one silinoid had a wire plug like the rest and that spot on the old ons doesnt it looked like the pressure sensor. Next to it
Automotive Expert
First off, when it comes to the Transmission fluid for this car, do not use any other fluids accept the CVT fluid from the dealer. Any other fluid can cause premature Transmission failure since it does not have the exact same friction materialsWhat code were you or are you getting?

I start it and it revs up fine and no code but then it goes into limp mode and idk what code yetWhats the pic of how do i know if its aligned
Automotive Expert
Does it move what so ever?Or does it just rev and not move?

Revs and wont move
Automotive Expert
That sounds like you did not line up the shift rod

Its move like a half foot after awileHow do i know if its wrong or right it only goes on one way right?
Automotive Expert
You are going to need to check that shift rod

It kinda seemed like it was pulled way out but the braket oly fit in the grouve at that position
Automotive Expert
https://gofile.me/5AB0c/QzrUGi7vJ

The video It didnt work
Automotive Expert
Sorry, I am trying to share it from my phone. I can share it again later this evening when I am home if you can wait till then?

I have a question on a eclipse ive been battling to run again for awhile
Automotive Expert
we are limited to one topic per question. You will need to ask that in the mitsubishi category

Okay
Automotive Expert
Have a good evening

Okay I changed my solenoid back on my valve body and now it jerks it moves but jerks it's topsstops whyWould having the wrong transmission fluid make it do that
Automotive Expert
Yes, if you use the wrong fluid it will contaminate the transmission and can certainly cause that because the bell is slipping

I put it in gear and it jerks and stops car after moved
Automotive Expert
That could be due because the CVT belt is slipping

its a good possability that if i go do git the right cvt fluid it might work
Automotive Expert
If you already used the incorrect fluid, the transmission is now contaminated and will require replacement

What others are asking

Headlights not working.
Hello, the first thing to check would be the fuse(s) for the headlamps (https://www.yourmechanic.com/services/headlight-is-not-working-inspection). If the fuses are good, if it's just the low beam and the hi beams that work ok, I would suspect the multifunction switch. The multifunction...
What does the low engine oil pressure Warning Light mean?
The low engine oil pressure Warning Light is located on the instrument panel. When this light illuminates, the oil pressure is too low. You should pull over to a safe location and check the oil level. If the oil is...
Alternator not charging
Hello. If the alternator is not charging the battery then it may be failing. There are other problems that can occur such as bad battery connections or a failing battery cable. If the car has the wrong battery in it...
Crank no start
You will need to have the engine scanned for codes and diagnosed for loss of spark or fuel. Your water pump is driven by the timing belt, and if the belt broke (https://www.yourmechanic.com/services/timing-belt-replacement) or water pump (https://www.yourmechanic.com/services/water-pump-replacement) seized, then you...
Vibration you can feel in steering wheel , floor, gear shifter and passenger seat. - 2014 Ford Explorer 4WD
Hi there - I suspect your vibration behavior (https://www.yourmechanic.com/article/what-causes-a-car-to-shake) is caused by driveshaft problems with one or both of the driveshafts. This may be simply an out-of-balance problem, or a mis-aligned or bent driveshaft issue. You should have eliminated bent...
doesn't move when i put it in reverse but then i put it in 4 low then reverse and it slips but it moves.
You have the Chrysler 46RE transmission. Among the possible causes of what you describe is a rear servo piston that is sticking or broken, pin bore wear and/or the reverse band is slipping. The servo piston on the 46RE has...
The computer (ECM) says it's EGR flow and there is no other symptoms. What you think is the problem?
Either the EGR (Exhaust Gas Recirculation) valve is stuck in the open position or is closed and not opening. First try removing the EGR valve and cleaning it out. Then see if the engine light goes out after cleaning the...
Check engine light flashes on then turns off what does that mean?
A flashing check engine light (https://www.yourmechanic.com/article/what-does-the-check-engine-warning-light-mean-by-spencer-cates) usually refers to cylinder misfiring. Misfiring should be investigated and resolved promptly - that's why the light flashes versus simply staying steady - because misfiring can damage the catalytic converter which can result in...
Engine meter shows overheating but engine is not hot
It sounds like you may have had the thermostat stuck closed for a short time and then open up and temperature went down. I would recommend you get the engine coolant thermostat replaced before thermostat stops working all together and...