I just had an EVAP test done on my car and they found it ...
Responses
A. Penland
267 days ago
Welcome to Just Answer. My name is\*\*\*\*\* am a manufacturer trained Ford Senior Master Technician with 30 years of hands on experience. I am here to help. I'm sorry to hear you are having trouble with your vehicle today. The system will offer you a phone call. Feel free to accept or decline this service. It does not come directly from me. I personally cannot provide phone assistance on this website as I only do on line chat. I am usually on line in the evenings after 6:30 PM CST after I get off of work. Please give me a few moments to go over your concerns.
First and foremost let me give you a little information on how this platform works. It is a strict one question one answer service. You ask one question and I will get as many details as I can from you. The reason for this is so I can provide you as accurate an answer as possible. Once I have submitted your answer please feel free to let me know if any clarification is needed about the answer to your question!
Would you mind sending me your VIN and as many details as you can about the problem? This will allow me to give you the most accurate information possible based on your specific vehicle. Please know this is not an auto response message system. I am a full time Ford automotive technician, I review cases as they come in. If you do not receive a prompt response, this means I have stepped away momentarily or are working on your case as well as many others. Please be patient and I will be with you after your reply!
A. Penland
267 days ago
The service advanced trac warning is warning the driver that the ABS module senses a problem with the ABS system. You will need to have the ABS module scanned for trouble codes. If you get the ABS system scanned, which some auto parts stroes can do, post the codes on this page and I can tell you where the cause of the problem could be.
267 days ago
The service advanced trac warning is warning the driver that the ABS module senses a problem with the ABS system. You will need to have the ABS module scanned for trouble codes. If you get the ABS system scanned, which some auto parts stroes can do, post the codes on this page and I can tell you where the cause of the problem could be.
Customer
267 days ago
How is this relevant to the EVAP scan perform and the purge valve fixed?
A. Penland
267 days ago
They are two different systems and have no effect on each other.
Customer
267 days ago
I should take the car to a mechanic to look at? Are you sure they are irrelevant? Why did you need my VIN #?
A. Penland
267 days ago
The VIN# \*\*\*\*\* me to pull your vehicles information up on Ford database to check for recalls and to give me all the proper shop manuals.
Plus with the VIN# \*\*\*\*\* can check for recalls on the vehicle which are VIN# \*\*\*\*\*
Customer
267 days ago
Can Mavis Discount Tire store take care of this? They do undercar work.
A. Penland
267 days ago
You can take it to a mechanic to have the ABS system checked out.
Customer
267 days ago
Ok. I will try to do this this weekend.
A. Penland
267 days ago
OK.
Customer
267 days ago
For some strange reason the SERVICE ADVANCETRAC light no longer illuminates.
A. Penland
267 days ago
If the light is off and you have no braking or driving issues, drive it till the light comes back on. It may be an intermittent concern.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car seats are extremely uncomfortable
From researching this issue, it seems to be a common concern with a few Honda models. In short, the seats are specifically designed for your vehicle. Seat engineers are tasked with having to meet certain safety standards set by the...
Don't understand CEL Codes.
The codes P0300 through P0306 are for misfires of random cylinders or different cylinders. The second code P1456 is for the evaporative fuel tank system having a leak somewhere in the system (https://www.yourmechanic.com/article/how-to-diagnose-a-fluid-leak-by-mark-vallet). Since you are getting random misfires, then...
Thumps and grinding noises in differential
It is possible that you could have a faulty wheel bearing (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings). Wheel bearings can often cause grinding noises when the lubrication onside them dries up. I would recommend having your vehicle inspected once more for a rear wheel bearing...
AC makes hissing noise and doesn't blow cold
The hissing noise is due to the A/C evaporator being starved of enough refrigerant. You will need to have refrigerant and dye added to the system and the hissing will go away. Then use a leak dye light (black light)...
Okay, I have a '99 Dodge Ram 2500 w/8.0 V10. The timing chain needs to be replaced. Should I replace the gears also?
Hi there. When changing out the timing chains, it is recommended to replace all the sprockets. The sprockets are worn into the old chains and can cause the new chains to prematurely fail or stretch. You can use a tensioner...
Can you pass emissions with a turbocharged car with odb-2 if it did not originally come with a turbocharger?
Can you pass emissions with a newly turbocharged car that has ODB-2 that does not come with a turbocharger from the factory? It is illegal to modify any factory installed emissions system on a motor vehicle. Adding a turbocharger...
The AC starts out cold but doesn't stay cold, blows out cool air after about 20min.
Hi there. Sometimes a compressor clutch failure or restriction from the low pressure side of the AC system can cause this type of problem. In other cases, it'll be due to a refrigerant leak. It's always a good idea to...
335d p20ee code, SCR metering valve cleaning
The valve is accessible but testing, which is performed coincident to cleaning, requires a BMW specific bi-directional scan tool. The scan tool is used to remotely actuate the valve to see if it is even working. There are other causes...
Code coming up is P0496. I never had any problems til I tried to drive up a steep hill.
The trouble code P0496 (https://www.yourmechanic.com/article/p0496-obd-ii-trouble-code-evap-flow-during-a-non-purge-condition-by-valerie-johnston) refers to a fault in the vehicle's evaporative emissions (EVAP) control system. Faults in the EVAP system will not typically cause loss of power. Perhaps other codes were stored but were missed in downloading that...
Browse other content
Estimates
Maintenance
Services
I just had an EVAP test done on my car and they found it was the purge valve and fixed it. Now I see the SERVICE ADVANCETRAC light on. What does this mean? Mechanic's Assistant: Just to clarify, what are the exact lights y...
I just had an EVAP test done on my car and they found it was the purge valve and fixed it. Now I see the SERVICE ADVANCETRAC light on. What does this mean? Mechanic's Assistant: Just to clarify, what are the exact lights you're talking about? The SERVICE ADVANCETRAC light on my 2010 Mercury Milan. Mechanic's Assistant: Anything else we should know to help you? No Mechanic's Assistant: OK. Got it. I'm sending you to a secure page to join JustAnswer. While you're filling out that form, I'll tell the Expert about your situation and then connect you two.