My 2001 Mazda mvp van wants to quiet running while I'm dr...


My 2001 Mazda mvp van wants to quiet running while I'm driving it and it takes about 5 times start it. After 5 time its starts up Mechanic's Assistant: Will the headlights turn on? Is the battery fully charged? Everything...

My 2001 Mazda mvp van wants to quiet running while I'm driving it and it takes about 5 times start it. After 5 time its starts up Mechanic's Assistant: Will the headlights turn on? Is the battery fully charged? Everything turns on when I turn the key Mechanic's Assistant: What is the model of your '01 Mazda? Mvp van Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I put a new battery and it still doing the same thing Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I need a good running vehicle for me and my 2 kids

Automotive Expert
Hello and welcome to Just Answer! My name is \*\*\*\*\* \*\*\*\*\* I am here to help answer your questions. I am sorry to hear you are having issues with your vehicle. I will do my best to give you the answer you are looking for. Please allow me a few minutes in between our responses to review your information. I may ask several questions to get more details about your problem. While you are waiting for me to respond I am looking up the workshop manuals and wiring diagrams needed to answer your concerns. **The website will prompt a phone call automatically, not me. So please don't let this automatic service prompt annoy you. If you prefer to talk verses type then please use the phone call option.** Hello, the first thing that comes to mind is you may have a weak fuel pump. Does it run normally once it starts back up? Any warning lights on and have you checked for any fault codes using a diagnostic scan tool?

No warning lights comes after it starts it wants quiet why im driving it
Automotive Expert
Ok, you will need to run thru a process of elimination since it starts and stalls. Even though no warning lights are on you will want to use a scan tool to check for any present or pending diagnostic trouble codes. Perform a visual inspection under the hood for any vacuum leaks and fluid level checks. If that all checks out, next would be doing a fuel pressure test using a fuel pressure gauge to see if the pump pressure is good and go from there.
Automotive Expert
I hope you find this information helpful. If any part of my response is unclear, please let me know. It’s my goal to deliver excellent service, so please let me know if there is anything more I can do. Thank you for using our site.

What others are asking

Gasket or main seal leaking oil.
There are dozens of places where oil leaks can originate. The rear main seal and head gasket are just two of the possibilities. I suggest you have dye put in the oil system to determine where the leak is coming...
Car won't accelerate past a certain speed
You may be having a problem with the A pilar; the sunroof drain could be leaking water into some electrical connections in the driver's side kick panel. The connections for the throttle position pedal sensor are there, which may have...
Every time I drive the epc light goes on and it's says check engine service now and sometimes it just cuts off while driving
Hello. If your warning lights are on then the first thing I would do is retrieve the trouble codes, as they will likely reveal some insight on what the issue may be. Warning lights (https://www.yourmechanic.com/services/warning-light-is-on-inspection) and stalling (https://www.yourmechanic.com/services/car-is-stalling-inspection) can be...
What's the thing call that connects your wheel to the putter tie ride and to the upper and lower ball joints
The part you are referring to is called the spindle. It connects the upper and lower control arms and connecting to the steering tie rod end. The brake caliper attaches to it also.
Looking for info about most common OBD2 Codes
There are two (at least) quite distinct issues in regard to your general request: The first is, once a check engine light illuminates, what are the most "frequent" codes that are stored and thence downloaded, that is what does THAT...
Why does my truck shut off when im at the stop light ?
There are a few common reasons for a vehicle to stall (https://www.yourmechanic.com/services/car-is-stalling-inspection). The most common causes are a clogged fuel filter, a failing fuel pump, vacuum leaks, or failing sensors. Some diagnostic testing will be necessary to determine where the...
Q: 2007 Infiniti fx35 starts runs fine in park or idle. Overheats when driving, cools in park/neutral. Oil/coolant fine, not milky
There are tests for exhaust gases in the coolant so the head gasket can be ruled in or out. A faulty thermostat can cause overheating so, yes, that is a possibility. The cooling system can't be ruled out because certain...
my 2015 Corolla vibrates when accelerating at 20-23mph. I put it in the Toyota shop 3 times. They said its normal. :(. Is it norma
The vibration is not normal and probably reflects an imbalance in a rotating engine or transmission component. Once engine speed and gear, at the time of the vibration, is known, that might help to narrow the diagnostic and in a...