Q: How do I remove a rear head restraint?

asked by on January 19, 2016

How do I remove a rear head restraint?

The rear outboard head restraints can be removed. To do so, first fold the restraint down by pulling on the fold strap. Then press both Release buttons on the base of the restraint, and pull the restraint straight up.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Surges of power on downhill
The issue you are having sound like either the throttle is not returning to a closed position or your transmission went into overdrive lock up when you let off of the accelerator pedal. Contact YourMechanic to go through a thorough...
How do you use the Window Lock?
Safety is important in your car, particularly if you have small children in the back seat. The Window Lock function allows you to disable the back window controls. When the lock is active, only the driver and front passenger can...
Shaking while driving & sometimes while parked
Hello there, Many different faults can cause your 1999 Chrysler LHS to shake when the engine is running. The most common causes would be an engine mount, spark plugs, coil, low fuel pressure, vacuum leak, or exhaust leak. For the...
Brake system malfunction
The master cylinder (https://www.yourmechanic.com/services/brake-master-cylinder-replacement) is likely worn out and should be replaced. The rubber cups simply allow the brake fluid to slip past, rather than compress, when the brake pedal is pressed. I would also replace all of your brake...
Fuel rail sensor faulty or fuel pressure too high
Hello there, a check engine light for too high of fuel pressure is unusual with your 2009 Audi Q5. There are one 2 possible faults going on. Either the fuel pressure is too high, or the fuel pressure sensor is...
There is a high pitch noise coming from speakers when using the air conditioning.
Hi and thanks for contacting Your Mechanic. Check the ground wires to the fan motor. The noise is the current from the fan motor going through the speaker wires. The stereo may be mounted on the same ground as the...
My headlights doesn't seem to work good.
The issue with your lights is the ballast resistor is not working properly. Ballast resistors are designed to monitor the amount of voltage to the headlights. If the lights are dimming out and then not working, then the ballast resistor...
i crunk my car this morning to warm it up and cut the defrost on.when i came back out the lighting bolt symbol was on so i cut it
The lightning bolt warning light means a fault was detected in the electronic throttle control system. It is possible that fault codes were stored which could be retrieved if you request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). Heater malfunctions vary...
Hard to turn steering wheel all the way
You should have the power steering scanned for codes to see if the electric power steering pump and accumulator are in need of replacement.

Related articles

A Buyer’s Guide to the 2012 Chevrolet Sonic
The The 2012 Chevrolet Sonic is not only the only domestic subcompact sedan (or hatchback) on the market today, but it’s also one of the most versatile models in its class. This entry-level subcompact car – available in both sedan...
2011 Dodge Ram vs. 2011 Ford F-150: Which One Should I Buy?
Large trucks can be fun to drive, and even more fun to get dirty. Unfortunately, they may also cause you to get phone calls from friends who need to move into a new apartment. Fortunately, just having a truck may...
How to Clean the Interior Roof of a Car
Car headliner fabric can absorb smells and become stained. Use a car upholstery cleaner to clean your car's interior fabric and roof.