Q: How do I activate the childproof door locks?

asked by on December 15, 2015

How do I activate the childproof door locks?

Childproof door locks are an invaluable safeguard for parents with kids of all ages. Activating them is also easy. Here’s all you need to do:

  1. Open the back door.

  2. Locate the lever on the inside edge of the door (close to the door latch itself).

  3. Move the switch down to set the childproof door lock (or up to deactivate it).

  4. Repeat this step for the other door.

Tip

Activating the childproof door locks means that the rear doors will not open from the inside at all, no matter what position the door lock is in.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the parking brake warning mean?
If your parking brake is on, you’ll see the Parking Brake light on the dash. However, you will also see a warning shown in the vehicle information display that tells you the parking brake is set. This warning is meant...
Bad gas in tank of 1994 Pontiac Bonneville
The first thing I would check would be for codes on the computer. If there are no codes present you could have a clogged catalytic converter. This is where the honeycomb inside the catalytic converter becomes so clogged that it...
Thumping sounds while driving over sharp bumps
The only part you did not mention (and the most likely cause of the problem) is the inside lower control arm bushings (https://www.yourmechanic.com/article/how-long-do-trailing-arm-bushings-last_2) are bad. I would also check the steering gear mount bushings (https://www.yourmechanic.com/article/how-long-does-a-steering-rack-mounting-bushings-last) for excessive wear. Both of...
Won't start
I would agree. The ignition switch (https://www.yourmechanic.com/article/how-to-install-an-ignition-switch-by-robert-tomashek) is sounding like the main suspect on your Suburban. That's the only thing that could lock your steering and then cause instrument cluster to not turn on. If you want to have this...
Dashboard lights out and something draining new battery
Hello there, thank you for asking about your 1957 Chevrolet Bel Air. Checking for parasitic draw on a battery can be done by inserting an ammeter in series with the negative battery cable, then removing the fuses one by one...
My car has possible alternator problems
Replacing the battery was a good first move, but it may not be the end of your problems. The alternator may not be charging up to it's capacity. You might not notice a problem for a while with a new...
Brake lights stay on 2000 Chevrolet Silverado 1500
Hi there - I believe your brake light switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-brake-light-switch) is either sticking or mis-adjusted, resulting in the brake lights remaining on after the brakes are used. Turning the ignition switch to the "Off" position removes power to that circuit,...

Related articles

A Buyer’s Guide to the 2012 Toyota Prius
Since Since they introduced the Prius, the very first mass-market hybrid, Toyota has been leading the auto industry in hybrid vehicles, and continues to do so in 2012. For this model year, the Prius saw some exciting new options, including...
A Buyer’s Guide to the 2012 Volkswagen TDI
The The 2012 Volkswagen TDI is a diesel powered car that is fuel efficient while offering an affordable starting price. It comes in a two door hatchback or a four door compact style with an automatic or manual transmission. A...
A Buyer’s Guide to the 2012 Lexus RX
The The Lexus RX paved the way for luxury crossover utility vehicles over a decade ago, and now it continues to make waves and turn heads. An incredibly attractive vehicle, the RX (now available as either the regular RX 350...