Q: how can you programm a keyless car with another remote

This noise may be the starter internal gear reduction making the noise. The starter would need to be replaced to get rid of the noise. The battery should also be checked. I recommend having a mechanic, like the ones from...

First to talk about air filters--K&N air filters are lubricated air filters. They have an element in them, but it's got oils in it. So, they do clean quite well and they flow a little bit better. If you have...

Hello. If the engine is shaking that bad and has no power, then it may have a bad misfire (https://www.yourmechanic.com/article/how-can-problems-with-the-ignition-system-cause-misfiring_2). This can be caused by a bad spark plug (https://www.yourmechanic.com/services/spark-plugs-replacement), but it can also be caused by a bad sensor...

Rather than trying to shift into drive, try shifting into neutral. If you are trying to move the vehicle, drive will lock it in gear, but neutral will allow the wheels to spin freely. If you are having difficulties shifting...

Hello. Rushing air noises during acceleration could be considered a normal part of operation. Even more so with high displacement engines, that rapidly ingest and move a lot of air and gases both through the intake and exhaust systems. If...

This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), or a failing coolant fan switch. As you may know, the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper coolant temperature...

There are several possible causes for a pop noise when turning the wheel. Finding the cause will really depend on what area the pop is coming from. Does it come from the steering column, under the dash, the engine compartment,...

There is no "direct" catalog interchange engine for your VIN because your present engine was installed at the factory with an engine specific computer(s), engine wiring harness, suspension (engine weights vary), and so forth. The alteration in weight will require...

Hi Mari. Thanks for sending your question to us today. In most cases, a lack of acceleration like you're describing is due to the transmission slipping. Sometimes this is due to dirty transmission fluid while in other cases, it's a...