2004 Honda CR-V


2004 Honda CR-V Mechanic's Assistant: Are you fixing your CR-V yourself? What have you tried so far? No the mechanic Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I have ...

2004 Honda CR-V Mechanic's Assistant: Are you fixing your CR-V yourself? What have you tried so far? No the mechanic Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I have positive camber in my front well and It seems to be that I cannot fix the problem

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. I appreciate your patience and will provide responses as soon as possible. Thank you. **what all has been attempted at correcting this?**

IMy 2003 Honda CRV front wheels have positive Cumbre on my mechanic cannot fix the problem we change basically everything on the on the front and still having the same problem
Automotive Expert
**has the front control arms been replaced?**

the last thing we are going to change is the tire rod
Automotive Expert
**Besides the lower control arms/lower ball joints, tie rods and stabilizer bar links, there really isn't much to the front suspension other than the struts**

I change the strutsI change spindle today and driver side well is good bu the Passenger-side side still have the positive Camber
Automotive Expert
**ok, well unless you have frame damage or something is bent, then the tie rods and ball joints should be subject**

Can you have a frame damage without being in an accidentThe ball joints was changed
Automotive Expert
not if was never in an accident, no

what you think is causing this problem
Automotive Expert
Phone call session started

What others are asking

Brakes not working correctly, grinding when trying to stop.
Hi, I have read articles that would indicate that Ford has a TSB (Technical Service Bulletin) for that year's model and for the lower control arm and several people are having the same problem. I would take it to the...
Rear shocks squeaking
It is a common problem with this car to have the key wear down and not trigger the tumblers in the key cylinder. The only fix would be to replace the key assembly and switch (https://www.yourmechanic.com/services/ignition-lock-assembly-replacement). I would suggest having...
Heads warped
Hi there. A stuck thermostat will definitely cause your engine to overheat. When your heads warp because of this, it is necessary to take it to an engine machining shop in order for them to attempt to straighten out the...
Fuses keep blowing
Your problem will probably be found in the dome light. There is probably a loose wire that is grounded out and causing the fuse to blow. You will have to remove the dome light and check the resistance on the...
Accelerating from red light, car jerks; also at 25-35 mph
Hello there. Many different faults can cause the vehicle to jerk and have acceleration issue. The most likely cause of these are spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service), MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), vacuum...
car will not crank and ECM.fuse keep blowing and no reverse lights will bad neutral safety switch cause this?
It sounds like you have an electrical issue. Check the DTC connector to make sure you are getting power and ground. A short to ground could be the cause of this concern. It may be possible that the reverse safety...
How do you check and fill a transmission on a 2005 mercury mountneer
Unfortunately, your car does not have the old style dipstick access and so it is really involved to change the fluid. Drain and refill on this model requires the following tools: Rubber Tip Air Nozzle (100-D009 (D93L-7000-A), Vacuum Pump Kit...
I believe I have an electrical issue. When I turn key the starter doesn't always spark and it takes a few tries but others it turn
The door lights and radio are on different circuits than the starting system and so faults there would not cause difficulty starting. The flickering of the lights is due to a loose connection somewhere in the circuit and can be...
Horn honks when the 10 minute run time times out.
Hello, thank you for writing in. This is security feature is designed to remind you the vehicle is still running to protect against thieves and high idle times. These idle times add to pollution, and are a main cause of...